Jabra BT3010 User Manual - Page 7

english 2. Set your Bluetooth phone to 'discover' the Jabra BT3010 • Follow your phone's instruction guide. First make sure that Bluetooth is activated on your mobile phone. Then set your phone to discover the headset. This usually involves going to a 'setup,''connect' or 'Bluetooth' menu on your phone and selecting the option to 'discover' or 'add' a Bluetooth device.* 3. Your phone will find the Jabra BT3010 • Your phone will find the headset under name "Bluetooth headset". Your phone then asks if you want to pair with the headset. Accept by pressing 'Yes' or 'OK' on the phone and confirm with the passkey or PIN = 0000 (zeros). Your phone will confirm when pairing is complete. Fig. 4 Connectivity MobilSurf Bluetooth Infrared port WAP options Synchronization Networks Select Info Devices found Bluetooth headset Select JABRA BT3010 Passkey: Ok Handsfree Bluetooth headset Added. The handsfree is now ready for use Ok In case of unsuccessful pairing, put the Jabra BT3010 into pairing mode manually. Make sure the headset is off. Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light.The LED will flash before the light is constant - keep holding down the button until light is constant. 1 2 Jabra BT3010 Bluetooth headset * Phone dependent