Jabra STONE User manual - Page 7

english PAIRING IT WITH YOUR PHONE Headsets are connected to phones using a procedure called 'pairing'. By following a few simple steps, a phone can be paired with a headset in a matter of seconds. 1 Put the headset in pairing mode 1.a First time pairing - Take the headset out of the portable charging unit. The headset will automatically start up in pairing mode (showing flashing blue light on the Jabra StatusDisplayTM) and start searching for a device. 1.b Pairing with another phone or re-pairing - Take headset out of the portable charging unit. Turn the headset off by long press on Answer/End button. Turn the headset on again by long press on Answer/End - keep pressing until StatusDisplayTM show flashing blue light. 2 Set your phone to 'discover' the Jabra Stone - Follow your phone's instruction guide. First make sure that is activated on your mobile phone. Then set your phone to discover the headset. This usually involves going to a 'setup,''connect' or ' ' menu on your phone and selecting the option to 'discover' or 'add' a device.* 3 Your phone will find the Jabra Stone - The phone will find the headset under name "Jabra Stone". - Your phone then asks if you want to pair with the headset. - Accept by pressing 'Yes' or 'OK' on the phone. If your phone asks for passkey or PIN confirm with 0000 (4 zeros). Your phone will confirm when pairing is complete. Jabra Stone supports version 2.1 including Simple Secure Pairing meaning that the headset can be paired with a phone or other device without using PIN or passkey but only if the other device supports version 2.1 also. CONNECTIVITY MobilSurf BLUETOOTH Infrared port Wap options Synchronization Networks SELECT DEVICES FOUND Jabra STONE Jabra STONE Passkey: **** SELECT OK Jabra Stone * Refer to phone's user manual HANDSFREE Jabra STONE added. The handsfree is now ready for use SELECT 6