Jensen JCR-290 User Manual - Page 11

SMART TALK COMMANDS COMMAND PHRASE Smart Talk Time Set Time Alarm Set Alarm Alarm Sound Alarm Off Snooze Sleep Time Play Sleep Sound Display Cancel FUNCTION DESCRIPTION AND FACTORY PRESET Trigger word to activate the voice recognition system. To check the current time. * Factory preset time is 12:00AM. To set the current time in AM or PM. To check the alarm time and status of AL1 & AL2. If the alarm is currently off, you have the option to turn it on or vice versa. * Factory preset alarm time is 7:00AM for AL1 and 8:00AM for AL2. To set the alarm time of AL1 & AL2 in AM or PM. To set the alarm sound for AL1 & AL2. You can select from among 3 nature sounds (Ocean, Rain or Brook), radio or the beep alarm. * Factory preset alarm sound is beep alarm for both AL1 & AL2. To cancel current alarm for the day while alarming is sounding or clock is in snooze mode. To activate the 9 minute Snooze while an alarm is sounding. You must say the command word "Snooze" during the brief pause during the alarm (except radio mode in which you need to tap the SNOOZE BAR) for it to work correctly. To set sleep time for 15, 30, 45 or 60 minutes or to turn it off. * Factory preset sleep time is 60 minutes. To choose a sleep sound from among 3 nature sounds (Ocean, Rain or Brook), or radio. If the sleep time is default to 60 minutes. You can adjust sleep sound output between levels 1-4 by pressing the > (UP) (#6) or < (DOWN) (#4) BUTTONS. * Factory preset sleep sound is Ocean and its output level is "2". To set the LCD backlight brightness to HI or LO. * Factory preset LCD brightness is High. To terminate the Smart Talk function immediately after it is activated. It can also be used in the middle to terminate certain Smart Talk commands: Set Alarm, Alarm Sound, Sleep Time, Play Sleep Sound amd Display. E-10