Jensen VM9312HD Operation Manual - Page 10

VM9312HD CONTROLS AND INDICATORS Button Operation 1. OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. WIDE/DISP Press to adjust the display aspect of the picture to one of two settings: Full or Normal. With the monitor closed, press the DISP button to cycle through information available on the LCD screen. When the NAV101 is connected to the VM9312HD, press and hold to display the navigation user interface. The TFT screen must be open for this function to operate. 3. PICTURE/AS Press to adjust the Brightness and Contrast. Press the AUDIO button (5) to move between Brightness to Contrast. Turn the rotary encoder (5) to adjust the setting for the selected option. Press and hold the AS button to automatically store strong radio stations in the preset channels for the current band. 4. TILT/BAND Press to activate the tilt function. Use the joystick to make adjustments while the red tilt icon is flashing. Press once to adjust the downward tilt angle of the screen one step at a time or press and hold to adjust the angle in a continuous motion. With the monitor closed, press the BAND button to change the AM, FM or SAT band. 5. AUDIO Rotate to adjust the volume. Press and release to enter and/ or confirm audio settings. 6. SRC Press once to select playing mode. 7. LCD Display 8. MUTE Press to silence the receiver. Press again to resume previous 5 volume level. 43 BAND AS TILT PICTURE PRESS AUDIO VM9312HD SRC NOTE: The VM9312HD features Softmute, which will allow the volume to increase or decrease gradually when the MUTE function is activated or deactivated. 6 9 7 6 21 DISP OPEN WIDE CLOSE 17 SAT 160 READY Watts EJECT 16 15 14 MUTE 13 8 10 11 12