Kenmore 4433 Use and Care Guide - Page 9

ALLOWING COOLING TIME BEFORE USE To ensure reliable food storage, allow you r refrigerator and freezer to operate with the doors closed for 8 to 12 hours before placing food inside. During this cooling period, you do not need to adjust the controls, which are preset at the factory. SETTING COOLING TEMPERATURES Your refrigerator comes with a state-of-the-art electronic digital control system. The system's control panel is located at the top of the the fresh food compartment. The two digital displays on the left half of the control panel indicate the current settings or temperatures of your freezer and fresh food compartments. The 2 gauges located on the front of the refrigerator just above the Ice and Water Dispenser also give you the current temperatures for the freezer and fresh food compartments. To adjust the temperatu re to a higher or lower setting, press the Up (Cold) or Down (Colder) button closest to the display. The first time you press the button, the display shows current setting you entered. Each press of the button after that changes the setting by one. The display shows your new setting momentarily, then changes back to the current temperature. Colder %. Cold Refrigerator Alarm On @ DoerAjar _ N/ mgha.n_ @ Reset Mode Colder PowerFaihre _ (Temperature Display : Features may vary.) Air Filter ...... _ FiJterOl( gl_f :: G Ord_Fl_ @ ChangeF[Iter Q CHOOSING FAHRENHEIT OR CENTIGRADE Depending on which temperature standard you prefer to use, you can set your control panel to display in fahrenheit or. centigrade. To change between fahrenheit and centigrade, press the Mode button (located between the two digital temperature displays). Freezer Gauge Refrigerator Gauge (Gauges will operate in Fahrenheit only) Cold Freezer Refrigerator Cdd ......... Colder Mode 1 ] Press to alternate between Fahrenheit and Centigrade Colder