Kenmore 9747 Use and Care Guide - Page 31

Kenmore 9747 - Elite 30 in. Electric Range Manual

Page 31 highlights

Self= Cleaning * * Setting Flex Clean Setting Delay Flex Clean INSTRUCTIONS When the Self-Clean 1. 2. PRESS DISPLAY cycle is done: The time of day,"Hot, DOOR LOCKED" and "CLEAN" icon will remain in the display (See Fig. 7). Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened. Fig.7 Stopping or Interrupting a Self-Cleaning cycle: If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven: 1. 2. Preset. Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED" icon is no longer displayed,the oven door can then be opened (Fig. 8). NOTES when using the Self-Clean feature: Fig.8 iMPORTANT 1. The Self-Clean feature will not operate whenever a radiant surface remains ON. 2. A Self-Clean cycle may be started if the appliance has the Cooktop started if Oven Lockout feature is active. Lockout active. A Self-Clean cycle cannot be iiii ...ii ... 3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly cleaned. Once power is restored, set for another Self-Clean cycle to finish. 4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 13 for instructions to set the control for the 24 hour time of day display mode. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

Self= Cleaning
*
Setting
Flex Clean
*
Setting
Delay Flex Clean
INSTRUCTIONS
When
the
Self-Clean
cycle
is done:
1.
The time of day,"Hot,
DOOR
LOCKED"
and "CLEAN"
icon will
remain
in the display
(See Fig. 7).
2.
Once the oven has cooled down for approximately
1 HOUR, and
the "DOOR
LOCKED"
icon is no longer displayed,
the oven
door can then be opened.
PRESS
DISPLAY
Fig.7
Stopping
or
Interrupting
a Self-Cleaning
cycle:
If
it becomes
necessary
to stop or interrupt
a Self-Cleaning
cycle
due to excessive
smoke or fire in the oven:
1.
Preset.
2.
Once the oven has cooled down for approximately
1 HOUR and
the "DOOR
LOCKED"
icon is no longer displayed,the
oven door
Fig.8
can then be opened
(Fig. 8).
iMPORTANT
NOTES when using the Self-Clean
feature:
1. The Self-Clean
feature will not operate whenever
a radiant surface remains
ON.
2. A Self-Clean
cycle may be started if the appliance
has the Cooktop
Lockout
active.
A Self-Clean
cycle cannot
be
started
if Oven
Lockout
feature
is active.
3. If a Self-Cleaning-Cycle
has started but not finished
and a power failure occurs,
the appliance
may not have thoroughly
cleaned.
Once power is restored,
set for another
Self-Clean
cycle to finish.
4. If your clock is set for normal 12 hour display
mode the Delay Self-Clean
cycle can never be set to start more than 12
hours in advance.
To set for Delay Flex-Clean
12-24
hours in advance
see page
13 for instructions
to set the control
for
the 24 hour time of day display
mode.
iiii
............
...........
ii
.......
31