Kenmore HE3t Use and Care Guide - Page 5

INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. The parts supplied are in the washer drum. Tools needed for connecting the water inlet hoses s Pliers (that open to 1 39.5 mm]) s Flashlight (optional) Tools needed for installation s Open end wrenches 17 mm and 13 mm s Level s Wood block s Ruler or measuring tape Parts supplied A B Options Pedestal You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (25.4 cm) or a 15.5" (39.4 cm) pedestal. Remember that the pedestal will add to the total height of the washer. C D E A. Drain hose form B. Inlet hose (2) C. Inlet hose washer (4) D. Transport bolt hole plug (4) E. Beaded strap Alternate Parts Parts listed are available from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME® (1-800-469-4663). If You Have You Will Need to Buy Laundry tub or standpipe taller than 96" (2.4 m) Sump pump system (if not already available) Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers) Floor drain Siphon break, Part Number 285834; additional drain hose, Part Number 8318155; and connector kit, Part Number 285835 Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part Number 285863 Water faucets 2 longer water fill hoses: beyond reach of fill 6 ft (1.8 m) Part Number 76314, hoses 10 ft (3.0 m) Part Number 350008 A B A. 10" (25.4 cm) pedestal B. 15.5" (39.4 cm) pedestal This pedestal (with storage drawer) is available in several colors. To order, call your local Sears store. For further information, please call 1-800-4-MY-HOME® (1-800-469-4663). Pedestal Height Approximate Color Height with Washer Part Number 10" (25.4 cm) 48" (122 cm) White 46822 15.5" (39.4 cm) 53" (135 cm) White 57822 Stack Kit Are you planning to stack your Kenmore washer and dryer? To do so, find the stack kit (8541503) in the drum of the matching Kenmore dryer. Follow instructions included with the kit. See "Location Requirements." 5