Kenwood DNX7120 Instruction Manual

Kenwood DNX7120 - Navigation System With DVD player Manual

Get Kenwood DNX7120 - Navigation System With DVD player PDF manuals and user guides
UPC - 019048177230
View all Kenwood DNX7120 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DNX7120 manual content summary:

  • Kenwood DNX7120 | Instruction Manual - Page 1
    GPS NAVIGATION SYSTEM DNX7120 MONITOR WITH DVD RECEIVER DDX712 DDX7032 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/ DVD Receiver. For
  • Kenwood DNX7120 | Instruction Manual - Page 2
    Auto Memory 40 Manual Memory 41 Preset Select 42 Set Station Name 42 SIRIUS/XM Control (North American sales area only) 43 Functions While Displaying the Control Screen 43 Channel Search 44 Channel Memory 44 Direct Channel Search 45 Bluetooth Audio Control 46 Functions While
  • Kenwood DNX7120 | Instruction Manual - Page 3
    Setting Up the Hands Free Phone 57 Voice Registration 58 Key Word Voice Registration 59 Phone Number Preset 60 SMS (Short Message Service) 61 Remote Controller 90 Battery installation 90 Remote Controller mode switch 90 Common operations (AUD mode) 91 DVD/VCD/CD/Audio files (DVD
  • Kenwood DNX7120 | Instruction Manual - Page 4
    in memory one after another. Switches to the next frequency manually. Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory 2 Store in memory 4 DNX7120/DDX712/DDX7032 Continue to touch until the memory number appears. Next page 3 The above
  • Kenwood DNX7120 | Instruction Manual - Page 5
    English 5
  • Kenwood DNX7120 | Instruction Manual - Page 6
    Reset button. The unit returns to factory settings when the Reset button is pressed. • Remove the USB device before pressing the Reset button. Pressing the Reset button with the USB device installed can damage the data contained in the USB device. For how to remove the USB device, refer to
  • Kenwood DNX7120 | Instruction Manual - Page 7
    nano (3rd Generation) • Fifth Generation iPod (iPod with video) • iPod classic • iPod touch Update iPod software to the latest version. Supports audio only on iPod Touch. By connecting your iPod to this unit with an optional accessory iPod connection cable (KCA-iP300V), you can supply power to your
  • Kenwood DNX7120 | Instruction Manual - Page 8
    first setout is played. • Playable disc media CD-R/RW/ROM, DVD±R/RW • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device USB mass storage class, iPod with KCA-iP300V • Playable USB device file system FAT16, FAT32 Although the audio files are
  • Kenwood DNX7120 | Instruction Manual - Page 9
    a wide image picture (16:9) is displayed on a standard TV set screen (4:3) with a black band at both the top and bottom of the screen (letter box). Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the
  • Kenwood DNX7120 | Instruction Manual - Page 10
    to the Navigation system Press the button to switch the display to the navigation system screen. E Attenuates the volume Press it to attenuate the volume. Press it again to cancel muting. Playing a USB device When connecting a USB device, playback starts automatically. You must update the database
  • Kenwood DNX7120 | Instruction Manual - Page 11
    Source Select screen see (page 70). A Playing a disc When you load a disc into disc loading slot, the disc starts playing. If a menu appears, when playing a video disc, select the desired item. ⁄ • See (page 7) for a list of supported discs
  • Kenwood DNX7120 | Instruction Manual - Page 12
    control screen. Press it again for more than 1 second to resume the normal display. (with the optional accessory Bluetooth unit connected only) C Sets button can be changed to Display Off function. See (page 66) for the function setting of the [NAV] button. 12 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 13
    screen The function control screen switches in the following order each time you press the button. Navigation screen [FNC] button Easy Control buttons appear. Picture or Video playback screen [FNC] button Easy Control buttons appear. Navigation screen Picture or Video playback screen DVD VIDEO
  • Kenwood DNX7120 | Instruction Manual - Page 14
    source can be controlled while displaying navigation screen. 1 Display the easy control buttons When "DVD" is selected: 2 Setting the navigation system function Touch the navigation system button displayed on the screen. See the included NAVIGATION SYSTEM's INSTRUCTION MANUAL for information on
  • Kenwood DNX7120 | Instruction Manual - Page 15
    mode. ; When touched this area, the source control screen appears. When "Bluetooth" is selected: 21 21 22 23 24 a Selects a file. s Plays. d Pauses. f When touched this area, the source control screen appears. ⁄ • The Easy Control buttons are hidden when you touch the central part of the
  • Kenwood DNX7120 | Instruction Manual - Page 16
    can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, refer to (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, refer to (page 90). Functions During the Playback Screen
  • Kenwood DNX7120 | Instruction Manual - Page 17
    in the next time. 3 Plays or pauses. 4 Switches to the playback screen. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. DVD VIDEO Mode:Full AV - O U T: AV
  • Kenwood DNX7120 | Instruction Manual - Page 18
    or a track. When the DVD-VIDEO/VCD is paused, touch this button to start single-frame stepping. p Plays or pauses. q Ejects the disc from the built-in disc player. w Slow Forwards or Backwards. (during DVD play) e Switches the button display. r Switches the Repeat Play operations in the following
  • Kenwood DNX7120 | Instruction Manual - Page 19
    voice language. (during program playback only) e Displays the Zoom Control screen. r Clears the Disc Menu Control. Zoom Control MenuCtrl SUB 3/ 3 Audio 1 / 2 H i g h l i gh t On ⁄ • To cancel Highlight Control, press [FNC] button. • The operation ends automatically if you do not operate within
  • Kenwood DNX7120 | Instruction Manual - Page 20
    - O U T: AV - I N DVD VCD PBC Scene VER2 ST 3 IN P 0:05 AF Z o omC t r l 2 2 2 1 Z o om x 2 2 3 Ex i t 1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button. 20 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 21
    to (page 8) for playable files. Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. or During CD playback 1 2 3 7 9 10 5 8 11 12 5 13 14 4 6 7 15 16 17 Selects the Disc Name (See
  • Kenwood DNX7120 | Instruction Manual - Page 22
    such as Tag and content property) of Audio file being played. f Displays the external device control screen. See (page 47). 22 23 24 1 Switches to the playback screen. If there is no playback screen, wallpaper is displalyed. 2 Folder and File Number Display
  • Kenwood DNX7120 | Instruction Manual - Page 23
    to hierarchy. 1 Start Folder Select 3 Enter the name See (page 49) for information on how to enter a name. 4 End Name set 2 Selects a song 21 3 4 2 5 6 1 Scrolls the list. 2 Lists folders and Audio files Folder opens when touched, and the Audio file is played. When is
  • Kenwood DNX7120 | Instruction Manual - Page 24
    DNX7120/DDX712/DDX7032 SCRN O O  1 1 DVD MEDIA 2 2 1 PICTURE 3 P IN 0:00:05 1 Selects a file. 2 Stops playing. 3 Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch
  • Kenwood DNX7120 | Instruction Manual - Page 25
    when a JPEG is being played.) 7 Stops playing. When pressed twice, the disc is played back from its beginning in the next time. 8 Selects a file. 9 Plays or pauses. p Ejects a disc. q Selects a folder. w Switches the button display. e Starts or stops Scan Play (that plays the beginning of each song
  • Kenwood DNX7120 | Instruction Manual - Page 26
    opens when touched, and the Video/ Picture file is played. When is appeared, the text display is scrolled by pressing it. 2 Scrolls the list. 3 Moves to the top hierarchy level. 4 Moves up a hierarchy level. 5 Opens the selected folder. 6 Returns to the original screen. 26 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 27
    method of receiver button operations, refer to (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, refer to (page 90). Functions While Displaying the Control Screen Switches to the source control screen to
  • Kenwood DNX7120 | Instruction Manual - Page 28
    order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. 2 Select the Auto Memory mode 3 Start Auto Memory Touch or . Auto Memory
  • Kenwood DNX7120 | Instruction Manual - Page 29
    Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory  : Press for # seconds. Preset Select Lists and selects memorized station. 1 Start Preset Select 2 Store in memory Continue to touch until the memory number appears. 2 Selects a station
  • Kenwood DNX7120 | Instruction Manual - Page 30
    You can display the radio text. (Only when receiving the FM broadcast) 1 Select a station 2 Display the radio text Set Station Name Assigns a name to a station. 1 Tune in to the station to name 2 Start Name set 1 2 2 3 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio
  • Kenwood DNX7120 | Instruction Manual - Page 31
    set its program type. (Only when receiving the FM broadcast) 1 Enter Program Type mode When the traffic bulletin starts... The Traffic Information screen appears automatically. Traffic Information screen Continue to touch more than 2 seconds, the currently receiving station is registered to
  • Kenwood DNX7120 | Instruction Manual - Page 32
    O O  1 1 iPod 2 P IN 0:00:05 . 1 Music/Video Search. 2 Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. 32 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 33
    button display. p Starts or stops Scan Play (that plays the beginning of each music or video one after the other). q Repeats to play (the preset files or data). w Starts or stops Random play.* e Displays the Hands Free screen. (page 51) r MUSIC or VIDEO indicator t Starts or stops Album Random Play
  • Kenwood DNX7120 | Instruction Manual - Page 34
    music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. 3 All the music in its category is played. 4 Returns to previous category. 5 Moves to the top category. 6 Displays the currently playing category. 34 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 35
    English 35
  • Kenwood DNX7120 | Instruction Manual - Page 36
    ). q Repeats to play (the present music). w Starts or stops Random Play (to play music in random order). e Displays the Hands Free screen. (page 51) r Repeats to play the music or data of the present folder. (Only in Folder Select Mode) t Updates the audio file database in the USB device. y Displays
  • Kenwood DNX7120 | Instruction Manual - Page 37
    Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. 1 Start Folder Select 2 Select a category 1 2 When is appeared, the text display is scrolled by pressing it. 1 Displays the currently playing category. 2 Returns to the original screen. 3 Select music
  • Kenwood DNX7120 | Instruction Manual - Page 38
    a channel. Use the (page 40) to change the channel tuning sequence. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. 38 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 39
    P1 to P6 buttons, you can recall channels on memory. For memory of broadcasting stations, see (page 41) or (page 41). r Sets a name to the tuned station. (page 42) t Lists and selects memorized station. y Displays the external device control screen. See
  • Kenwood DNX7120 | Instruction Manual - Page 40
    order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. 2 Select the Auto Memory mode 3 Start Auto Memory Auto Memory terminates
  • Kenwood DNX7120 | Instruction Manual - Page 41
    Manual Memory Stores the current receiving channel in memory. 1 Select a station you wish to store in memory 2 Store in memory Continue to touch until the memory number appears.  : Press for # seconds. English 41
  • Kenwood DNX7120 | Instruction Manual - Page 42
    Set Station Name Assigns a name to a station. 1 Select a station you wish to name 2 Start Name set 2 Selects a station 1 1 Memorized stations are displayed. Touch to tune in. 3 Enter the name See (page 49) for information on how to enter a name. 4 End Name set 42 DNX7120/DDX712
  • Kenwood DNX7120 | Instruction Manual - Page 43
    Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory Switches the button display. 8 Starts or stops
  • Kenwood DNX7120 | Instruction Manual - Page 44
    XM Control (North American sales area only) Channel Search Specifying the desired category and selecting a channel. 1 Start Channel Search Channel Memory Stores the current receiving channel Composer Name. (SIRIUS only) Continue to touch until the memory number appears. 44 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 45
    Direct Channel Search Tuning in by entering the desired channel number. 1 Start Direct Channel Search 2 Enter the channel number 1 2 3 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number. 3 Tune in the channel  : Press for # seconds. English 45
  • Kenwood DNX7120 | Instruction Manual - Page 46
    Displays the Hands Free screen. (page 51) 6 Displays the external device control screen. See (page 47). ⁄ • If the Bluetooth Audio player does not support AVRCP profile, buttons 1 to 4 are not displayed. Operate from the Audio player. 46 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 47
    power supply. 2 Returns to the original screen. ⁄ • You must connect a commercially available relay unit in order to use this function. Connect the external device to be controlled to that relay unit. • Refer to (page 85) for information on setting the power on or off specification
  • Kenwood DNX7120 | Instruction Manual - Page 48
    paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to . 48 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 49
    . 4 Sets the key layout of the character buttons. abc : Alphabetical key layout. qwe : Qwerty key layout. 5 Enters a space. If you erase a character, locate the cursor on it and touch this button. 6 Clears the character. 7 Exits the Character Entry mode and returns to the previous screen. ⁄ • You
  • Kenwood DNX7120 | Instruction Manual - Page 50
    on Video, iPod, USB or Rear View Camera screen only. 4 Contrast Control 5 Black Level Adjustment 6 Dimmer Mode Setup "ON": The display dims. "OFF": The display doesn't dim. "SYNC": Turning the Dimmer function On or Off when the vehicle light control switch is turned On or Off. "NAV-SYNC" (DNX7120
  • Kenwood DNX7120 | Instruction Manual - Page 51
    cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone. Control Screen Function Displaying the control screen and using various functions. 1 Display the Hands Free Control screen Press the [FNC] button for more than 1 second. or 2 1 3 4 8 5 6 10
  • Kenwood DNX7120 | Instruction Manual - Page 52
    the entered phone number. See (page 61). 3 Clears the number. 4 Returns to the previous screen. 3 Make a call You can start talking when the destination responds. 4 End the call 52 DNX7120/DDX712/DDX7032 The Hand Free screen reappears. ⁄ • You can input max 32 digits
  • Kenwood DNX7120 | Instruction Manual - Page 53
    in advance. See (page 60). 1 Recall the phone number Controlling tone-based services Uses tone base service using DTMF (Dual Tone Multi Frequency). 1 Display the DTMF input screen Display the Talking screen. See (page 52). 2 Make a call
  • Kenwood DNX7120 | Instruction Manual - Page 54
    registered in the same cellphone, [Record] button is deactivated. See (page 58). p Plays the voice registered in the selected Phonebook data. q Deletes the voice registered in the selected Phonebook data. Touch to display the confirmation screen. Touch [YES] to delete or [NO] to
  • Kenwood DNX7120 | Instruction Manual - Page 55
    outgoing or incoming calls list. 1 Display the Outgoing Calls or Incoming Calls screen ⁄ • To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone. • Initials including no corresponding name will
  • Kenwood DNX7120 | Instruction Manual - Page 56
    to the previous screen. 4 Make a call If the voice recognition is succeeded and there is only one phone number found: 2 ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation. 3 Make a call. 3 Displays the phonebook list. 56 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 57
    59). q Registers the phone number to Hands Free Control screen preset button. See (page 60). w Returns to the Hands Free Control screen. ⁄ • Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone, whichever is shorter, takes
  • Kenwood DNX7120 | Instruction Manual - Page 58
    Hands Free Unit Control Voice Registration Registers voice for voice recognition in . "REC" turns on for data with voice for voice recognition already registered. 2 Display the voice registration screen 3 Utter the voice to register (1st try) 3 2 2 Registers the voice. 3 Cancels voice registration
  • Kenwood DNX7120 | Instruction Manual - Page 59
    Phone number category. 3 Plays voice registered for the selected Phone number category. 4 Deletes voice registered for the selected Phone number category. Touch to display the confirmation screen. Touch [YES] to delete or [NO] to cancel. 5 Returns to the Hands Free Set Up screen. 3 Display voice
  • Kenwood DNX7120 | Instruction Manual - Page 60
    control screen preset button. 1 Display the Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See
  • Kenwood DNX7120 | Instruction Manual - Page 61
    screen 2 Select a function 1 2 3 4 5 1 Displays received message list. 2 Displays sent message list. 3 Displays the Message screen. If there is an unfinished message, the button type. i Sends the message. o Sets the key layout of the character buttons. ABC : Alphabetical key layout. QWE
  • Kenwood DNX7120 | Instruction Manual - Page 62
    receiver parameters. Setup Menu Displays the setup menu to set various functions. 1 Display the control screen of any source Touch any source button on the "Source Select" screen. 2 Display the SETUP Menu Audio Setup You can setup a speaker network, etc. 1 Display the Audio SETUP screen Touch
  • Kenwood DNX7120 | Instruction Manual - Page 63
    the sub woofer phase. (Only when "Subwoofer" is set to "ON" in Audio Setup and "LPF SUB FREQ" is set to other than "Through") 8 Returns to the "Audio SETUP" screen. DVD Setup You can setup the DVD play. 1 Display the DVD SETUP screen Touch Menu" screen (page 62). in the "SETUP 2 Setup each item
  • Kenwood DNX7120 | Instruction Manual - Page 64
    Audio Language setup.) 4 Sets the language and returns to the "DVD SETUP 1" screen. (It appears after you have entered a language code.) 5 Clears the language code. 3 Enter a language code See (page 96) and select the desired language. 4 Set the language you use 64 DNX7120
  • Kenwood DNX7120 | Instruction Manual - Page 65
    "DVD SETUP 2" screen. 3 Indicates the present parental lock level. 4 Determines the code number and displays the Parental Level setup screen. 5 Clears the code number. ⁄ • The number you enter first is set as your code number. • You can clear the code number by pressing the Reset button. 3 Display
  • Kenwood DNX7120 | Instruction Manual - Page 66
    you to scroll the screen manually. 4 Selects a remote control signal. ( "On") When turned "Off", the remote control of TV reception is rejected. 5 Sets a music CD playback. ( "1") "1": Automatically recognizes and plays back an Audio file disc, a DVD or a music CD. "2": Forcibly plays back a disc as
  • Kenwood DNX7120 | Instruction Manual - Page 67
    audio and visual (AV) interface parameters. 1 Display the AV Interface screen Touch Menu" screen (page 62). in the "SETUP 2 Setup each item 1 2 3 4 5 1 Moves to the "AV Interface 2" screen. 2 Sets a name to be displayed when you select a system that is connected via the AV INPUT port. ( "VIDEO
  • Kenwood DNX7120 | Instruction Manual - Page 68
    displayed in the favorite source screen. See (page 70). 5 Returns to the "SETUP Menu" screen. 68 DNX7120/DDX712/DDX7032 6 7 8 9 10 11 6 Returns to the "User Interface 1" screen. 7 Moves to the "User Interface 3" screen. 8 Sets an on-screen display of the iPod
  • Kenwood DNX7120 | Instruction Manual - Page 69
    Sets an on-screen display of the TV screen. ( "Auto") (with the optional accessory TV tuner connected only) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. t Sets an on-screen display of the DVD Playback screen. ( "Manual
  • Kenwood DNX7120 | Instruction Manual - Page 70
    the source displayed in the favorite source screen. 1 Displays the Direct SRC button Setup screen Entering Background Loads a image for background. 1 Connect the device which has the image to load 2 Display the User Interface screen Touch Menu" screen (page 62). in the "SETUP 3 Display the
  • Kenwood DNX7120 | Instruction Manual - Page 71
    screen Background Select Selects a image for background. 1 Select Background Change screen 2 Select the image to be deleted 1 2 Select a image for background 1 2 1 Returns to the original screen. 3 Delete the image 1 Returns to the initial background. 2 Returns to the original screen. 3 Set
  • Kenwood DNX7120 | Instruction Manual - Page 72
    in synchronization with the time data sent from the navigation system or the RDS station. ( DNX7120: "Navigatoin", DDX712/DDX7032: "On") When the synchronized mode is set, the clock cannot be adjusted manually. 6 Returns to the "SETUP Menu" screen. 3 Adjust the clock time 72 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 73
    "SETUP Menu" screen. ⁄ • In this Screen Control screen, you can perform setups for the menu screen. Setups for videos such as DVD can be performed on the (page 50). 7 8 9 10 11 7 Returns to the "Screen Control" screen. 8 Moves to "Mode Select 1" screen. 9 Sets the Monitor angle
  • Kenwood DNX7120 | Instruction Manual - Page 74
    code to protect your receiver system against theft. ⁄ • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security Code Setup screen Touch Menu" screen
  • Kenwood DNX7120 | Instruction Manual - Page 75
    . ⁄ • If you enter a different security code, the screen returns to Step 3 (for the first code entry). 6 Register the security code again If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code You must enter the same security
  • Kenwood DNX7120 | Instruction Manual - Page 76
    Code 3 1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off. 3 Returns to the "SETUP Menu" screen. ⁄ • "Wide Screen" cannot be set while the iPod is connected. Input by four-digit number. 4 Register your security code Now, your security code is cleared. 76 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 77
    Display the Sirius Setup screen Touch Menu" screen (page 62). in the "SETUP Sirius Parental Code Setup Sets a Sirius Parental code. 1 Display the Parental Code screen 1 2 3 4 1 Sets the Parental lock code. See (Page 77). 2 Switch the Parental lock function on and off
  • Kenwood DNX7120 | Instruction Manual - Page 78
    is now set to on or off, and the display returns to "SIRIUS SETUP" screen. ⁄ • If you have not registered the parental code, the code number you input in this step will be the number to register as Sirius Parental Code. In this case, you are requested to input the code once more. 78 DNX7120/DDX712
  • Kenwood DNX7120 | Instruction Manual - Page 79
    Channel Select Selects the channel to enable Sirius Parental lock function. 1 Display the Parental Code screen 2 Enter the code number Enter the same code number as you input in . 4 Set the parental lock for each channel 5 7 6 6 8 10 9 11 5 Lists the channel
  • Kenwood DNX7120 | Instruction Manual - Page 80
    for Hands Free and Audio player for Bluetooth Audio. 2 Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 3 Returns to the "SETUP Menu" screen. 80 DNX7120/DDX712/DDX7032 Registering Bluetooth Unit Registers the Bluetooth unit to be
  • Kenwood DNX7120 | Instruction Manual - Page 81
    PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Receiver PIN Code screen 2 Enter PIN code 1 2 3 4 1 Enters a code number. 2 Cancels registration of PIN code. 3 Enters PIN code. 4 Clears the code number
  • Kenwood DNX7120 | Instruction Manual - Page 82
    Bluetooth unit. 3 Returns to the previous screen. 3 Select the service to use 4 6 5 7 4 Connects/disconnects cell-phone to use for Hands Free. 5 Connects/disconnects Audio player to use for Bluetooth Audio. 6 Deletes registration (pairing). 7 Returns to the previous screen. 82 DNX7120/DDX712
  • Kenwood DNX7120 | Instruction Manual - Page 83
    1 Display the DivX Setup screen Touch Menu" screen (page 62). in the "SETUP 2 Select a Bluetooth unit to delete 1 3 Delete the Bluetooth unit 1 Displays the registration code. ⁄ • When downloading a DivX VOD file controlled by DRM, register the code appeared on the screen such as the one above
  • Kenwood DNX7120 | Instruction Manual - Page 84
    settings. When Lock is selected, you cannot set the Audio Setup and AV Interface settings. 2 Memorizes or recalls the settings. To cancel the function, touch No . To cancel memorization, touch No . The SETUP Menu screen appears again. 3 Returns to the original screen. 2 Start Setup Memory Touching
  • Kenwood DNX7120 | Instruction Manual - Page 85
    output on/off each time the button on the EXT SW Control screen is pressed. 3 Sets the Pulse signal output time. Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set. 4 Returns to the original screen. Setting EXT SW Control 2 (EXT SW2) The setup method is
  • Kenwood DNX7120 | Instruction Manual - Page 86
    Audio Control screen. Audio Control You can adjust the front/rear and right/left audio balance. 1 Display Audio Control screen Touch in the "Audio Control Menu" screen (page 86). 2 Set the each item 4 1 2 5 6 3 3 4 7 1 Moves to the "Audio Control 2" screen. 2 Adjust the front/back
  • Kenwood DNX7120 | Instruction Manual - Page 87
    may be extremely loud. • You may not set some models of power amp boost to "+18". See the catalog or instruction manual of power amplifier. Equalizer Control You can setup the equalizer. 1 Display Equalizer Control Touch in the "Audio Control Menu" screen (page 86). 2 Display the Equalizer
  • Kenwood DNX7120 | Instruction Manual - Page 88
    the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. 6 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.) 7 Returns to the "Audio Control Menu" screen. 88 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 89
    ⁄ • There are following limitations when zone function is set to "On". - There is no output from the subwoofer. - (page 62) and (page 87) are not available. English 89
  • Kenwood DNX7120 | Instruction Manual - Page 90
    be operated using the Remote Controller (DNX7120; RC-DV330, DDX712/DDX7032; RC-DV340) supplied with the unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged
  • Kenwood DNX7120 | Instruction Manual - Page 91
    R.VOL  0 CLEAR DIRECT AT T V.SEL Switches to the navigation screen. O SRC  MENU ZOOM OUT IN O ENTER O DISP V.SEL  POSITION AUD • DVD • TV• DISP SRC V.SEL MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM   O O O O Display angle Switches the display
  • Kenwood DNX7120 | Instruction Manual - Page 92
    0 CLEAR DIRECT AT T Pressing this button switches the features that can be searched directly. DVD Title number Chapter number Play time Item number* Cancel * You may not be able to use this function with some discs or scenes. CD Track number Play time Cancel Audio files Folder number File number
  • Kenwood DNX7120 | Instruction Manual - Page 93
    VIEW MAP DIR ANGLE DISP SRC V.SEL MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM   Radio (AUD mode) [RC-DV330] [RC-DV340] Band switching Switches to bands received by the unit.  O FM+ D O O O AM−  Y 1 1 2ABC  ANGLE ZOOM 3 DEF O VOL O 2 ZONE
  • Kenwood DNX7120 | Instruction Manual - Page 94
    SUBTITLE VIEW MAP DIR ANGLE O MAP DIR Switches between the heading up navigation and north up navigation map displays. O NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR O  O O FM+ D ANGLE ZOOM O VOL 94 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 95
    TV (TV mode) [RC-DV330] [RC-DV340] Switching Band/Video It switches between the station of the TV band to receive and video input. ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR  O FM+ D O O O AM−  Y ANGLE ZOOM O VOL O 2 ZONE O O AM−   1 1 FM+ OPEN D Y 2ABC  3
  • Kenwood DNX7120 | Instruction Manual - Page 96
    DVD Language Codes Code Language Code aa Afar is ab Abkhazian it af Afrikaans ja am Amharic Interlingua sa ie Interlingue sd ik Inupiak sg id Indonesian sh 96 DNX7120/DDX712/DDX7032 Language Icelandic Italian Japanese Javanese Georgian Kazakh Greenlandic Cambodian Kannada
  • Kenwood DNX7120 | Instruction Manual - Page 97
    the media again or use another media. Navigation ? The touch panel control of the navigation system does not work. ✔ Navigation software is not the latest version. ☞ Update the navigation software. For how to update the software, refer to the instruction manual of the navigation unit. English 97
  • Kenwood DNX7120 | Instruction Manual - Page 98
    can be connected to this unit> (page 7). Update your USB database: The USB device is different from the previous one or the contained audio files are replaced. ➡ Update your database. Refer to of USB Device Control (page 36). 98 DNX7120/DDX712/DDX7032
  • Kenwood DNX7120 | Instruction Manual - Page 99
    can receive signal. Updating Firmware: Updating the firmware of Sirius tuner. ➡ Operation is invalid until the update is completed. Updating Channels **% Completed: Updating the Sirius Channel Map. ➡ Operation is invalid until the update is completed. Subscription Updated: Updating the suscription
  • Kenwood DNX7120 | Instruction Manual - Page 100
    98 dB (DVD-Video 96 kHz) Disc Format : DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency : 44.1/ 48/ 96 kHz Quantifying Bit Number : 16/ 20/ 24 bit USB interface section USB Standard : USB 1.1/ 2.0 File Sytem : FAT 16/ 32 Maximum Power Supply Current : 500 mA D/A Converter : 24 Bit Audio Decoder : MP3
  • Kenwood DNX7120 | Instruction Manual - Page 101
    SW Maximum Power Supply Current : 500 mA Navigation section (DNX7120 only) Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : < 38 seconds Factory Reset : < 45 seconds (On average for a stationary receiver with a clear view of the sky
  • Kenwood DNX7120 | Instruction Manual - Page 102
    to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However
  • Kenwood DNX7120 | Instruction Manual - Page 103
    play all versions of DivX video, including DivX 6. Certified products qualify for one of several DivX Profiles that designate the type of video the product supports, from compact portable video to high-definition video Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
  • Kenwood DNX7120 | Instruction Manual - Page 104
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
GPS NAVIGATION SYSTEM
DNX7120
MONITOR WITH DVD RECEIVER
DDX712
DDX7032
INSTRUCTION MANUAL
©
B64-4103-00/00 (KW/RW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System/ DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX7120/DDX712/DDX7032
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com