Kenwood DNX7120 Instruction Manual - Page 63
Crossover Network Setup, DVD Setup
UPC - 019048177230
View all Kenwood DNX7120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 1 2 2 4 3 5 1 Sets the High Pass Filter of the front speaker. 2 Sets the High Pass Filter of the rear speaker. 3 Sets the Low Pass Filter of the sub woofer. 4 Switches to the crossover setup screen. 5 Returns to the "SETUP Menu" screen. 2 Display the Crossover setup screen 3 Set the crossover 6 7 8 6 Sets the cross over frequency. When front speaker or rear speaker is selected in step 1: High Pass Filter adjustment When Subwoofer is selected in step 1 : Low Pass Filter adjustment 7 Sets the sub woofer phase. (Only when "Subwoofer" is set to "ON" in Audio Setup and "LPF SUB FREQ" is set to other than "Through") 8 Returns to the "Audio SETUP" screen. DVD Setup You can setup the DVD play. 1 Display the DVD SETUP screen Touch Menu" screen (page 62). in the "SETUP 2 Setup each item 1 2 3 4 5 6 1 Moves to the "DVD SETUP 2" screen. 2 Selects a disc menu language.*1 (See , page 64) 3 Selects a subtitle language.*1 (See , page 64) 4 Selects an audio language.*1 (See , page 64) 5 Sets the dynamic range.*1 ( "Wide") The dynamic range is reduced by changing from "Wide" to "Normal" and from "Normal" to "Dialog". "Dialog" makes the total sound volume becomes larger as compared with "Wide" and "Normal", allowing you to listen to the movie's dialog more clearly. This is effective only when you are using a Dolby Digital software. The operation is available during the play stop mode. 6 Returns to the "SETUP Menu" screen. Next page 3 English 63