Kenwood KCA-S220A Instruction Manual - Page 2

Connection Connectable Control Units and Disc Changer/Disc Player Units 7 Connectable Control Unit Group A: This group covers control units with disc changer control, where the source selection allows you to switch between 1 and 2, where the manual instructs you to set the O-N switch on the disc changer to "N". Group B: This group covers units released on to the market in or after 1999, where the manual covers AUX mode under switching sources. 7 Connectable Disc Changer/Disc Player Units Disc changer/disk player units released on to the market in or after 1999. • Any control unit and disc changer/disc player unit other than those above cannot be connected. If connected, the switching unit can be out of order or damaged. • If the disc changer/disc player unit you have connected has an O-N switch, set it to the "N" position. Components ! Switching unit 1 " Connection cable (2 m 1 # Velcro strip 2 $ Self-tapping screw (φ 4 × 16 mm).......2 Connection Example To the external unit Control unit Changer control output AUX IN Switching unit ! (Rear side) OFF ON AUX SWITCH AUX IN TO HEAD UNIT TO CHANGER 1 TO CHANGER 2 TO HEAD UNIT TO CHANGER 1 TO CHANGER 2 Connection cable " Switching unit ! (Front side) CD changer Connection cable (supplied with the CD changer) Connection cable (supplied with the MD changer) MD Changer • After connecting the equipment, press the reset button on the control unit. • The figure shows that one CD changer and one MD changer are connected. Two CD changers or two MD changers may be connected. • A disc player such as the KDC-D301 or KCA-iP500 (etc.) may be connected instead of the disc changer. 2 KCA-S220A