Kenwood KCA-S220A Instruction Manual - Page 3
If you want to connect a stack CD changer - used
UPC - 019048168382
View all Kenwood KCA-S220A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
• If you wish to adjust the cable length in accordance with the installation location of the switching unit, such as in the trunk space, the disc changer extension cable may be used instead of the connection cable ". • When a control unit belonging to Group A is used, you cannot use both TO CHANGER 2 terminal and AUX terminals at the same time. For more details, see (page 5). If you want to connect a stack CD changer AUX IN To the external unit Switching unit ! (Rear side) OFF ON AUX SWITCH AUX IN Control unit Changer control output TO HEAD UNIT TO CHANGER 1 TO CHANGER 2 TO HEAD UNIT TO CHANGER 1 TO CHANGER 2 Connection cable " Switching unit ! (Front side) Connection cable (supplied with the Disc changer) Extension cable (CA-C2EX: Optional) Disc player Disc changer Stack CD changer Connection cable (supplied with the stack CD changer) • Connect the stack CD changer to the terminal labelled TO CHANGER 2. • Up to two disc changers can be connected. • The O-N switch on the disc changer and the disc player should be set to "N". If you set it to "O", the equipment will not function correctly. • The total length of the cable between the units should not be more than 13 m (43 ft). Control unit KCA-S220A Stack CD Changer Disc Player Not more than 13 m (43 ft) • If the voltage is low and the internal temperature of the switching unit is low, switching may fail to work properly in some cases. • The AUX switch on the stack CD changer should be switched "OFF" before using the equipment. The AUX terminal on the KCA-S220A switching unit is the one that should be used. English 3