Kenwood KDC-448U Instruction Manual - Page 59
Channel preset memory, Preset tuning, Select a number and store it in the memory
UPC - 019048193124
View all Kenwood KDC-448U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Channel preset memory Putting the channel in the memory. 1 Select the channel to put in the memory Push the Control knob towards right or left. 2 Enter Preset memory mode Press the [PRESET] button. 3 Select a number and store it in the memory Turn the Control knob to select memory number, and then press the Control knob for at least 2 seconds. Cancelling the Preset memory mode Press the [ ] button. ⁄ • Only the channel number is stored. Category information is not stored. • If you press the [PRESET] button twice in step 2, Mix Station preset mode is entered with "Mixed Preset List" displayed. In this mode, different bands and tuner sources (Radio, Sirius, XM etc.) can be saved in the same preset layer, which allows you to recall the desired station without switching the bands or tuner sources. Maximum of six stations can be preset in the Mix Station preset mode. Once the Mix Station preset mode is set, you can enter the same mode by just pressing the [PRESET] button once in step 2. Pressing the [PRESET] button twice returns to the normal Station preset mode. Preset tuning Recalling the channels in the memory. 1 Enter Preset memory mode Press the [PRESET] button. 2 Select the number you want to recall from the memory Turn the Control knob to select recall number, and then press the Control knob. Cancelling Preset tuning Press the [ ] button. English | 59