Kenwood KDC-HD552U Instruction Manual - Page 22
Installing the unit, Removing the unit, Installing without using the mounting sleeve Japanese car - wire harness
View all Kenwood KDC-HD552U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installing the unit 1 Connect the wiring harness to the unit. Other wiring connection has been completed earlier. (page 21) 2 Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the top side.) Dashboard of your car Bend the appropriate tabs to hold the mounting sleeve firmly in place. Installing without using the mounting sleeve (Japanese car) 1 Remove the mounting sleeve and escutcheon from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with the supplied screws. T: Toyota cars ; N: Nissan cars Removing the unit 1 Detach the faceplate. 2 Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out. 3 Insert the removal tools deeply into the slots on each side, then follow the arrows instructions as shown on the right. 22