Kenwood KDC MP5032 Instruction Manual

Kenwood KDC MP5032 - AAC/WMA/MP3/CD Receiver With External Media Control Manual

Get Kenwood KDC MP5032 - AAC/WMA/MP3/CD Receiver With External Media Control PDF manuals and user guides
UPC - 019048165121
View all Kenwood KDC MP5032 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood KDC MP5032 manual content summary:

  • Kenwood KDC MP5032 | Instruction Manual - Page 1
    CD-RECEIVER KDC-MP5032 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in
  • Kenwood KDC MP5032 | Instruction Manual - Page 2
    2 | English The "AAC" logo is trademark of Dolby Laboratories.
  • Kenwood KDC MP5032 | Instruction Manual - Page 3
    Input Display Setting Text Scroll CD Read Setting Audio Preset Memory Audio Preset Recall Demonstration mode Setting Basic Operations of remote control 27 Accessories/ Installation Procedure 30 Connecting Wires to Terminals 31 Installation 32 Removing the Unit 34 Troubleshooting Guide
  • Kenwood KDC MP5032 | Instruction Manual - Page 4
    damage the unit. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be
  • Kenwood KDC MP5032 | Instruction Manual - Page 5
    radio tuner Refer to the instruction manual of SIRIUS Satellite radio tuner KTC-SR901/SR902/SR903 (optional accessory) when connected, for the operation method. • Refer to the sections of A models for operations.  '.4$3D ". "650 o  43$ Cleaning the Unit If the faceplate of this unit is
  • Kenwood KDC MP5032 | Instruction Manual - Page 6
    the modifications are expressly approved in the instruction manual. The user could lose the authority to operate receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • Kenwood KDC MP5032 | Instruction Manual - Page 7
    to your CD-R/CD-RW writing software, and your CDR/CD-RW recorder instruction manual.) CD storage • Do not place CDs in direct sunlight (On the seat or dashboard etc.) or where the temperature is high. • Store CDs in their cases. CD accessories Do not use disc type accessories. CD cleaning Clean
  • Kenwood KDC MP5032 | Instruction Manual - Page 8
    speaker. • The files with copy protection cannot be played. • The settings . Refer to http://www.kenwood.mediamanager.jp for the details Player 9 or after which applies the new functions) • Transfer bit rate: 48-192 kbps • Sampling frequency: 32, 44.1, 48 kHz Playable media • CD-ROM, CD-R, CD-RW • CD
  • Kenwood KDC MP5032 | Instruction Manual - Page 9
    Source Press the [SRC] button. Source required SIRIUS tuner (Optional accessory) Tuner or HD Radio (Optional accessory) CD External disc (Optional accessory) Auxiliary input (Optional accessory) Standby (Illumination only mode) Display "SIRIUS" "TUNER" or "HD RADIO" "CD" "CD CH" "AUX EXT" "STANDBY
  • Kenwood KDC MP5032 | Instruction Manual - Page 10
    , the current sound setting is displayed. Each time you press the button, the sound setting alternates. Sound setting User memory Rock Pops Easy Top 40 Jazz Flat Display "USER" "ROCK" "POPS" "EASY" "TOP40" "JAZZ" "NATURAL" • User memory: The values set on the (page 10). • Change
  • Kenwood KDC MP5032 | Instruction Manual - Page 11
    not set to Through. • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - Set up the channel of (page 24). - Select Main source by [SRC] button. - Adjust the volume of Front channel by [VOL] knob. - Adjust the
  • Kenwood KDC MP5032 | Instruction Manual - Page 12
    " "CLOCK" In SIRIUS tuner source Information Channel name Song title Artist name Composer name Category name Label name Comment 12 | English Display "CH NAME" "SONG" "ARTIST" "COMPOSER" "CATEGORY" "LABEL" "COMMENT" Band & Channel number Clock "CH NUM" "CLOCK" In Standby/ Auxiliary input source
  • Kenwood KDC MP5032 | Instruction Manual - Page 13
    ON. • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 31). 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. English | 13
  • Kenwood KDC MP5032 | Instruction Manual - Page 14
    station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Manual Display "AUTO 1" "AUTO 2" "MANUAL" Operation Automatic search for a station. Search in order of the stations in the Preset memory. Normal manual tuning control. • During reception of stereo
  • Kenwood KDC MP5032 | Instruction Manual - Page 15
    button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 3 Enter the frequency Press the number buttons on the remote Press the [AME] button for at least 2 seconds. "A-MEMORY" is displayed. When 6 stations that can be received are put in the
  • Kenwood KDC MP5032 | Instruction Manual - Page 16
    the original position Press the [0] button. Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD CH" "MD CH" Disc player CD changer MD changer
  • Kenwood KDC MP5032 | Instruction Manual - Page 17
    disc players being connected. Fast remote control Direct Disc Search Doing Disc Search by entering the disc number. 1 Enter the disc number Press the number buttons on the remote control. 2 Do Disc Search Press the [+] or [-] button. Cancelling Direct Disc Search Press the [38] button. • Input
  • Kenwood KDC MP5032 | Instruction Manual - Page 18
    discs in the disc changer in random order. Press the [M.RDM] button. Each time you press the button, the Magazine Random Play turns ON or OFF. When the Magazine want to hear. 1 Enter Folder Select mode Press the [F.SEL] button. "FOLD SEL" is displayed. During Select mode the folder information is
  • Kenwood KDC MP5032 | Instruction Manual - Page 19
    Select mode releases, and the Audio file in the folder being displayed plays. Cancelling the Folder Select mode Press the [F.SEL] button. Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward [FM] for at least 2 seconds. • When the
  • Kenwood KDC MP5032 | Instruction Manual - Page 20
    Frequency display Preset station number About HD Radio • When you connect an HD Radio, Tuner features of the unit are disabled and the functions. Tuning Selecting the station. 1 Select HD Radio source Press the [SRC] button. Select the "HD RADIO" display. 2 Select the HD FM band Push the Control
  • Kenwood KDC MP5032 | Instruction Manual - Page 21
    items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control items that are not applicable ( etc.) are entered step by step. . English | 21
  • Kenwood KDC MP5032 | Instruction Manual - Page 22
    4 through 7 operation, and reenter the Security Code. "APPROVED" is displayed. The Security Code function activates. 9 Exit Security Code mode Press the [MENU] button. • If you enter the wrong code in steps 4 through 6, repeat from step 4. Resetting the Security Code function when the audio unit is
  • Kenwood KDC MP5032 | Instruction Manual - Page 23
    Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display. 2 Enter Clock Clock adjustment mode Press the [MENU] button. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate
  • Kenwood KDC MP5032 | Instruction Manual - Page 24
    System Circuit) Temporarily have reception alternate from stereo to mono to reduce multi-path noise Setting Sub source (Auxiliary input source) is to be rear channel. Sub source (Auxiliary input source) is to be 4 Exit Receive mode Press the [MENU] button. 24 | English • Even if the Receive mode is
  • Kenwood KDC MP5032 | Instruction Manual - Page 25
    number and the electronic SIRIUS Identification number for service activation and potential service changes. Auxiliary Input Display Setting Selecting the display when alternating to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX EXT" display. 2 Enter
  • Kenwood KDC MP5032 | Instruction Manual - Page 26
    setup by Sound Control. The memory cannot be erased by the Reset button. 1 Setup Sound Control Refer to the following operations to setup the "RECALL" display blinks 1 time. 7 Exit Menu mode Press the [MENU] button. • The User memory of (page 10) is changed to the value which was
  • Kenwood KDC MP5032 | Instruction Manual - Page 27
    alternating order refer to (page 9). [ATT] button Turns the volume down quickly. When the button is pressed again, the volume returns to the previous level. [ ] button Adjusts the Faceplate Angle. • Do not set the remote control in hot places such as above the dashboard
  • Kenwood KDC MP5032 | Instruction Manual - Page 28
    . In SIRIUS tuner source [FM] button Selects the preset band. [4]/ [¢] buttons Searches up or down channels. [0] - [9] buttons Press buttons [1] - [6] to recall preset channels. [DIRECT] button Enters and cancels the mode. • Refer to the instruction manual of SIRIUS Satellite
  • Kenwood KDC MP5032 | Instruction Manual - Page 29
    In HD Radio source [FM] button Selects the HD FM band. Each time you press the [FM] button, the band alternates between the HF1, HF2, and HF3 bands. [AM] button Selects the HD AM band. [4]/ [¢] buttons Tunes up or down bands. [0] - [9] buttons Press buttons [1] - [6] to recall preset stations.
  • Kenwood KDC MP5032 | Instruction Manual - Page 30
    Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6. Install the unit in your car. 7. Reconnect the - battery. 8. Press the reset button. 2WARNING If you connect
  • Kenwood KDC MP5032 | Instruction Manual - Page 31
    Connecting Wires to Terminals Rear left output (White) Rear right output (Red) To Kenwood disc changer/ External optional accessory To connect these leads, refer to the relevant instruction manuals. Fuse (10A) Sub Woofer left output (White) Sub Woofer right output SUB WOOFER (Red) Front left
  • Kenwood KDC MP5032 | Instruction Manual - Page 32
    ) Firewall or metal support Japanese cars 1 Refer to the section (page 34) and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. Bend the
  • Kenwood KDC MP5032 | Instruction Manual - Page 33
    the Unit If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screws in the holes shown below. Bottom panel Accessory5 • Never
  • Kenwood KDC MP5032 | Instruction Manual - Page 34
    Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Removing the Unit 1 Refer to the section (page 34) and
  • Kenwood KDC MP5032 | Instruction Manual - Page 35
    to one side. ☞ Center the fader and balance settings. ✔ The input/output wires or wiring harness are connected incorrectly. ☞ Reconnect the input/output wires or the wiring harness correctly. See the section on (page31). ✔ The values of Volume offset are low. ☞ Turn
  • Kenwood KDC MP5032 | Instruction Manual - Page 36
    Troubleshooting Guide Tuner source ? Radio reception is poor. ✔ The car antenna is not extended. ☞ Pull the antenna out all the way. ✔ The antenna control wire is not connected. ☞ Connect the wire correctly, referring to the section on (page31). ? The desired
  • Kenwood KDC MP5032 | Instruction Manual - Page 37
    to the CD cleaning of the section on (page receive mode switches between stereo and monaural too often. ☞ Receiving condition is bad or unstable. Stereo is chosen when receiving condition is good, and it switches to monaural when the condition becomes bad. ✔ HD Radio tuner is connected
  • Kenwood KDC MP5032 | Instruction Manual - Page 38
    play. NO PANEL: The faceplate of the slave unit being connected to this unit has been removed. ➪ Replace it. E-77: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the "E-77" code does not disappear, consult your nearest service center. E-99: Something is
  • Kenwood KDC MP5032 | Instruction Manual - Page 39
    Stereo separation (1 kHz) : 40 dB AM tuner section Frequency range (10 kHz space) : 530 kHz - 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dBμ (25 μV) CD player Operating voltage (11 - 16V allowable) : 14.4 V Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 155 mm 7-3/16 x
  • Kenwood KDC MP5032 | Instruction Manual - Page 40
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
CD-RECEIVER
KDC-MP5032
INSTRUCTION MANUAL
©
B64-3311-00/00 (KW/K0)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-MP5032
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.kenwoodusa.com