Kenwood KMM-105RY Instruction Manual - Page 22

Wiring connection

Page 22 highlights

INSTALLATION/CONNECTION Wiring connection If your car does not have an ISO terminal: We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles You may need to modify the wiring of the supplied wiring harness as illustrated below. A7 (Red) Ignition wire (Red) Vehicle Unit A4 (Yellow) Battery wire (Yellow) Default wiring Pin Color and function (for ISO connectors) A4 Yellow : Battery A5 Blue/White*1 : Power control A7 Red : Ignition (ACC) A8 Black : Earth (ground) connection B1 Purple ] : Rear speaker (right) B2 Purple/black [ B3 Gray ] : Front speaker (right) B4 Gray/black [ B5 White ] : Front speaker (left) B6 White/black [ B7 Green ] : Rear speaker (left) B8 Green/black [ 18 ENGLISH Fuse (10 A) Antenna terminal Yellow (Battery wire) Red (Ignition wire) If no connections are made, do not let the wire come out from the tab. Light blue/yellow STEERING WHEEL REMOTE INPUT (Steering remote control REMOTE CONT wire) To the steering wheel remote control adapter Red (A7) Yellow (A4) Blue/White*2 (Power control wire/ Antenna control wire) ANT CONT P. CONT To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle Brown (Mute control wire) To the terminal that is grounded when the telephone rings or during conversation MUTE (Page 13) (To connect the Kenwood navigation system, refer your navigation manual) ISO connectors NOTE: Total output for Blue/White wire (*1) + (*2) is 12 V 350 mA

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

18
ENGLISH
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P. CONT
ANT CONT
MUTE
Wiring connection
INSTALLATION/CONNECTION
Fuse (10 A)
Antenna terminal
Blue/White*2
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote control
wire)
To the power control terminal when
using the optional power amplifier or
to the antenna control terminal in the
vehicle
Brown
(Mute control wire)
To the terminal that is grounded when the
telephone rings or during conversation
(Page 13)
(To connect the Kenwood navigation
system, refer your navigation manual)
If no connections are made, do not let the wire come out from the tab.
To the steering wheel remote control
adapter
If your car does not have an ISO terminal:
We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as
illustrated below.
Unit
Vehicle
A7 (Red)
Ignition wire (Red)
A4 (Yellow)
Default wiring
Battery wire (Yellow)
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
ISO connectors
NOTE: Total output for Blue/White wire (*1) + (*2) is 12 V
350 mA
Pin
Color and function (for ISO connectors)
A4
Yellow
: Battery
A5
Blue/White*1
: Power control
A7
Red
: Ignition (ACC)
A8
Black
: Earth (ground) connection
B1
Purple
]
: Rear speaker (right)
B2
Purple/black
[
B3
Gray
]
: Front speaker (right)
B4
Gray/black
[
B5
White
]
: Front speaker (left)
B6
White/black
[
B7
Green
]
: Rear speaker (left)
B8
Green/black
[