Kenwood KMM-BT304 Instruction Manual 2 - Page 19

BLUETOOTH® Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . "PLEASE PAIR YOUR PHONE PIN 0000" appears. 2 Search and select this unit model name (KMM-BT3**/KMM-BT2**) on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. "TESTING" flashes on the display. The connectivity result (OK or NG) appears after the test. PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility To cancel test mode, press and hold off the unit. to turn BLUETOOTH - Audio While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. Audio player via Bluetooth 1 Press repeatedly (or press SRC on the remote control) to select BT AUDIO. 2 Operate the Bluetooth audio player to start playback. To On the faceplate On the remote control Playback/pause Press . Press . Select group or folder Press / . Press / . Reverse/Forward skip Press S / T. Press S / . Reverse/Fast-forward Press and hold S / T. Press and hold S / . Repeat play Press repeatedly. ALL REPEAT, FILE REPEAT, REPEAT OFF ( Not available ) Random play Press and hold to select ALL RANDOM. • Press to select RANDOM OFF. ( Not available ) Select a file from a folder/list Refer to "Select a file from a folder/ list" on page 9. ( Not available ) Switch between connected Bluetooth audio device Press 5.* ( Not available ) * Pressing the "Play" key on the connected device itself also causes switching of sound output from the device. Operations and display indications may differ according to their availability on the connected device. ENGLISH 19