Kenwood KVT-54DVDR User Manual - Page 72
Security Code Setup
View all Kenwood KVT-54DVDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Setup Menu Security Code Setup You can set a security code to protect your receiver system against theft. ⁄ • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security Code Setup screen Touch Menu" screen (page 58). in the "Setup 4 Register your security code 5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation. ⁄ • If you enter a different security code, the screen returns to Step 3 (for the first code entry). 6 Register the security code again 1 2 1 Displays the Security code input screen. 2 Turns the SI function on or off. If turned "ON", the burglar alarm lamp flashes when the vehicle ignition is off. ( "ON") 2 Start Security Code setup Now, your security code is registered. If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code. If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code ⁄ • If you have already completed the code registration, is displayed. 3 Enter a security Code You must enter the same security code as that you have entered in Step 3. 2 Enter the security code Input four-digit number. 72 KVT-524DVD/KVT-554DVD/KVT-54DVDR Now, you can use your Receiver.