Kenwood KVT-54DVDR User Manual - Page 82
Tone Setup, Zone Control
View all Kenwood KVT-54DVDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Audio Control Tone Setup You can set a Tone curve. 1 Display the Tone screen Zone Control You can set the front and rear audio source. 1 Display Zone Control Touch in the "Audio Control Menu" screen (page 80). See (page 81). 2 Set the Tone 1 2 5 3 6 4 7 8 9 1 Tone curve becomes flat. 2 Bass adjustment items are displayed. 3 Middle adjustment items are displayed. 4 Treble adjustment items are displayed. 5 Sets the Center frequency. 6 Sets the level. 7 Sets the Q factor. (Only Bass and Middle can be set) 8 Bass DC Extend settings (Only when Bass is selected) If turned "ON", it extends the bass center frequency to the low register by approximately 20%. 9 Returns to the "Equalizer" screen. 1 1 Displays the current source. 2 Set the Zone Control 2 3 3 4 2 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. 3 Sets the front and rear audio source separately. (This button appears when the Zone function is On.) ⁄ • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. 4 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.) 82 KVT-524DVD/KVT-554DVD/KVT-54DVDR