Kenwood SW10 Instruction Manual - Page 5
Connecting the subwoofer to the speaker output of the center unit with, built-in amplifier, Examples - ksc powered subwoofer
UPC - 019048175748
View all Kenwood SW10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connecting the subwoofer to the speaker output of the center unit with built-in amplifier Center unit Front speaker Connect the subwoofer to the front or rear output cords of the center unit. Rear speaker Note: Read the instruction manuals for the connected components such as the center unit as well as this instruction manual. KSC-SW10 ENGLISH Examples The following shows a typical connection for effective car stereo enjoyment. Connect your system by referring to the example. If there is no power control terminal in the center unit, connect the blue/white wire to the accessory line (ignition key switch ACC position line). Center unit Front or rear speaker Left Right Fuse 10A Car fuse box Ignition key switch Car fuse box (Main fuse) Battery White White/Black Gray Gray/Black Blue/White If buzzing noise is heard from the speakers when the engine is running, attach a line noise filter (commercially available) to the power lead. Yellow Yellow 6 10-pin connector cord Black Caution: Connect the black lead wire ground terminal directly with a screw to an unpainted metal part of the vehicle. Turning the power ON without connecting this terminal is linked to damage of the stereo system. Be sure to connect it. Also, painted metal panels etc., are not grounded and will not function correctly. Be careful. English