Kenwood TK-3131 Instruction Manual - Page 13
When charging is completed
UPC - 019048136329
View all Kenwood TK-3131 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
1 Plug the AC adapter cable into the adapter jack located on the rear of the charger. 2 Plug the AC adapter into an AC outlet. 3 Slide a battery pack using the supplied holder or a transceiver equipped with a battery pack into the battery pack slot. • Make sure the metal contacts of the battery pack mate securely with the charger terminals. • The indicator lights red and charging starts. 4 When charging is completed, the indicator lights green. Remove the battery pack or the transceiver from the battery pack slot. • It takes approximately 2.5 hours to charge the battery pack. • When the charger will not be used for a long time, unplug the AC adapter from the AC outlet. 7
7
1
Plug the AC adapter cable into
the adapter jack located on the
rear of the charger.
2
Plug the AC adapter into an AC
outlet.
3
Slide a battery pack using the
supplied holder or a transceiver
equipped with a battery pack
into the battery pack slot.
•
Make sure the metal contacts of
the battery pack mate securely
with the charger terminals.
•
The indicator lights red and
charging starts.
4
When charging is completed,
the indicator lights green.
Remove the battery pack or the
transceiver from the battery
pack slot.
•
It takes approximately 2.5 hours
to charge the battery pack.
•
When the charger will not be
used for a long time, unplug the
AC adapter from the AC outlet.