Kenwood TK3101K2 Instruction Manual - Page 17
seconds
View all Kenwood TK3101K2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4 Press the PIT switch to select the 10's digit of the signalling number. • Each time you press the PTT switch, a beep sounds and the 10's digit of the signalling number changes. There are a total of 4 different numbers (0 - 3). Press and hold PTT for 2 seconds Press PTT 1 time Press PTT 2 times Press PTT 3 times Ox 1 second tone 1x 2x • • 3x • •• Note: ♦ To select V, press andhold the PITswitch untila 1second tone sounds (approximately 2 seconds). ♦ Pressing the PTTswitch more than 3 times willcause an error tone to sound, andno value wi//be selected. 5 Wait for 2 seconds to hear the beep pattern of the 10's digit number you selected . 6 Press the PTT switch to select the l's digit of the signalling number. • Each time you press the PTT switch, a beep sounds and the l's digit of the signalling number r- changes. There are a total of 10 different numbers (0 - 9). s 10 Sal