Kenwood TM-271A User Manual - Page 57
select Menu No. 28 DTMF.MR.
View all Kenwood TM-271A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
DTMF TX HOLD This function causes the transceiver to remain in transmission mode for 2 seconds after you release each key. So, you can release Mic [PTT] while sending DTMF tones. 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 30 (DT.H). 2 Press [MENU] and turn the Tuning control to select "ON" or "OFF" (default). STORING A DTMF NUMBER IN MEMORY 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 28 (DTMF.MR). 2 Press [MENU] and turn the Tuning control to select your desired DTMF Memory Channel number from 0 to 9. • You can also select a DTMF Memory Channel by using Mic [UP]/[DWN]. 3 Press [MENU] to store the setting or any other key to cancel. 4 Press any key other than [MENU] to exit Menu Mode. AUTOMATIC DIALER If you use the 10 dedicated DTMF Memory Channels to store DTMF numbers, you do not need to remember a long string of digits. 3 Press [MENU]. • The DTMF code entry display appears and the first digit blinks. 4 Turn the Tuning control to select a DTMF code. • You can also enter a DTMF code using the Mic keypad. Simply press your desired DTMF codes on the keypad. • On the display, is represented by "E" and is represented by "F". 10 5 Press [MR] to select the DTMF code and move the cursor to the next digit. • To move to the previous digit, press [VFO]. To delete the character at the current cursor position, press [F]. 51