KitchenAid KBHS109BSS Installation Guide - Page 5
Warning - microwave
View all KitchenAid KBHS109BSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Make Electrical Connection WARNING 3-Wire Cable with Ground from Home Power Supply to Microwave Oven Cable with 4-Wires A I B Electrical Shock Hazard Disconnect power before servicing. Use 12 gauge solid copper wire. Electrically ground oven. Failure to follow these instructions can result in death, fire, or electrical shock. This microwave oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire. 1. Disconnect power. 2. Feed the flexible cable conduit from the microwave oven through the opening in the cabinet. 3. Remove junction box cover if it is present. 4. Install a UL listed or CSA approved conduit connector to the junction box. A A. UL listed or CSA approved conduit connector 5. Route the flexible cable conduit from the microwave oven to the junction box through a UL listed or CSA approved conduit connector. 6. Tighten screws on conduit connector. 7. Complete electrical connection. H C G F D E A. Cable from home power supply B. Green (or bare) wires C. White wires D. 4-wire cable from microwave oven E. UL listed or CSA approved conduit connector F. Red wires G. Black wires H. UL listed wire connector I. Junction box 1. Connect the 2 black wires (G) together using a UL listed wire connector. 2. Connect the 2 white wires (C) using a UL listed wire connector. 3. Connect the 2 red wires (F) together using a UL listed wire connector. 4. Connect the 2 green (or bare) wires (B) together using a UL listed wire connector. 5. Install junction box cover. Install Microwave Oven 1. Using 2 or more people, lift the microwave oven partially into the cabinet cutout. If a spacer kit has been installed, lift the microwave oven over it and position the microwave between the guide strips. C C A B A. Spacer bar flange B. Spacer bar C. Microwave oven 5