KitchenAid KOSE900HBS Installation Instructions - Page 16

Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all of your tools. 3. Dispose of/recycle all packaging materials. 4. For oven use and cleaning, read the Use and Care Guide. Check Operation of Single and Double Ovens 1. Turn on power. 2. At first use, set up the clock and any other preferences if available. For more information, read the Use and Care Guide. 3. Start a broil cycle. See the User Instructions for instructions. NOTE: Odors and smoke are normal when the oven is used the first few times. 4. Wait 5 minutes, then check for heat. If Oven(s) Does Not Operate, Check the Following: ■■ Household fuse is intact and tight, or circuit breaker has not tripped. ■■ Electrical supply is connected. ■■ See the "Troubleshooting" section in the User Instructions. 5. Place the SatinGlide™ Roll-Out Extension Rack for Smart Oven+ Attachments in the lowest rack position in the unit to make sure the correct accessory rack is on the bottom. 6. Press UPPER CANCEL/LOWER CANCEL on double ovens, or press CANCEL on single ovens. If You Need Assistance or Service: Please reference the "Warranty" section of the Use and Care Guide. 16