KitchenAid KUDE20FBSS Installation Guide - Page 17

Choose Attachment Option Open the door and align top edges. Predrill 2 pilot holes using a drill bit. Use tape to mark the drill bit to gauge hole depth. Drill pilot holes approximately 1¹⁄₂" (3.8 cm) into the top corners of the door using hole in liner as a guide. WARNING Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. Use 2 or more people to move and install dishwasher. IMPORTANT: The dishwasher must be secured to the cabinet. There are two brackets found in the parts bag. Attach the brackets using Option A if the countertop is wood, laminate or another similar surface. If your countertop is marble, granite or another hard surface, install using Option B. Option A, Countertop attachment: Remove the brackets from the package and insert into the open slots on the left and right-hand top of the dishwasher collar as shown. Install 2 long screws supplied in top corners to secure custom wood panel in place. Using a pair of pliers, bend the tab down to secure the bracket in place. Repeat this step for the other side. NOTE: Do not attach the dishwasher. This will be done later. Remove the short screws (3rd from top) on either side of the inner door panel. Predrill 2 pilot holes using a drill bit. Use tape to mark the drill bit to gauge the hole depth. Drill pilot holes approximately 1¹⁄₂" (3.8 cm) using the door liner hole as a guide into the panel. Install the 2 remaining long screws. 17