KitchenAid KUDE20FBSS Use & Care Guide - Page 9

Control Lock, Option Selections, Options, Can Be, Selected With, What It Does, Added Time To Cycle,

Page 9 highlights

OPTION SELECTIONS OPTIONS CAN BE WHAT IT DOES SELECTED WITH ADDED TIME TO CYCLE TYPICAL MAX ADDED WATER GALLONS (LITERS) Sanitizes dishes and Heavy Duty Raises the main 60 glassware in accordance Normal Wash wash temperature with National Sanitation from 105°F (41°C) Foundation (NSF)/ANSI to 145°F (63°C) and Standard 184 for the final rinse from Residential Dishwashers. 140°F (60°C) to Certified residential 155°F (68°C). dishwashers are not intended for licensed food establishments. The Sani indicator indicates at the end of the cycle whether the Sani Rinse option was successfully completed. If the indicator is not activated, it is probably due to the cycle being interrupted. 105 0 - 1.6 (0 - 6) Dries dishes with heat. Available with any Activates the 52 52 0 This option with the use of cycle except Rinse heating element at rinse aid will provide the Only the end of the wash best drying performance. cycle to speed Plastic items are less likely drying times. Heat to deform when loaded in Dry defaults to ON the top rack. Turn Heat Dry when any cycle is off for an air dry. selected except for 1 Hour Wash. Runs the dishwasher at a Available with any Delays the start of a 240 240 0 later time or during off- cycle cycle up to 4 hours. peak electrical hours. Select a wash cycle and options. Press 4 Hour Delay. Press START/ RESUME. Close the door firmly. NOTE: Anytime the door is opened (such as, to add a dish), the Start/Resume button must be pressed again to resume the delay countdown. Control Lock Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cycle. To turn on Control Lock, press and hold for 3 seconds. The Control Lock light will stay on for a short time, indicating that it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked, the light flashes 3 times. The dishwasher door can still be opened/closed while the controls are locked. NOTE: You may need to disable Sleep Mode by pressing either START/RESUME or CANCEL, or by opening and closing the door before you are able to turn Control Lock off. To turn off Control Lock, press and hold for 3 seconds. The light turns off. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

9
Sanitizes dishes and
glassware in accordance
with National Sanitation
Foundation (NSF)/ANSI
Standard 184 for
Residential Dishwashers.
Certified residential
dishwashers are not
intended for licensed food
establishments. The Sani
indicator indicates at the
end of the cycle whether
the Sani Rinse option was
successfully completed. If
the indicator is not
activated, it is probably
due to the cycle being
interrupted.
Heavy Duty
Normal Wash
Raises the main
wash temperature
from 105°F (41°C)
to 145°F (63°C) and
the final rinse from
140°F (60°C) to
155°F (68°C).
60
105
0 - 1.6
(0 - 6)
Dries dishes with heat.
This option with the use of
rinse aid will provide the
best drying performance.
Plastic items are less likely
to deform when loaded in
the top rack. Turn Heat Dry
off for an air dry.
Available with any
cycle except Rinse
Only
Activates the
heating element at
the end of the wash
cycle to speed
drying times. Heat
Dry defaults to ON
when any cycle is
selected except for
1 Hour Wash.
52
52
0
Runs the dishwasher at a
later time or during off-
peak electrical hours.
Select a wash cycle and
options. Press 4 Hour
Delay. Press START/
RESUME. Close the door
firmly.
NOTE:
Anytime the door is
opened (such as, to add a
dish), the Start/Resume
button must be pressed
again to resume the delay
countdown.
Available with any
cycle
Delays the start of a
cycle up to 4 hours
.
240
240
0
Control Lock
Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Control Lock, press and hold for 3 seconds. The Control Lock light will stay on for a short time, indicating
that it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked, the light
flashes 3 times. The dishwasher door can still be opened/closed while the controls are locked.
NOTE:
You may need to disable Sleep Mode by pressing either START/RESUME or CANCEL, or by opening and
closing the door before you are able to turn Control Lock off.
To turn off Control Lock, press and hold for 3 seconds. The light turns off.
OPTION SELECTIONS
OPTIONS
CAN BE
SELECTED WITH
WHAT IT DOES
ADDED TIME TO CYCLE
ADDED
WATER
GALLONS
(LITERS)
TYPICAL
MAX