Kodak C180 User Manual - Page 44

Troubleshooting Picture quality problems Status Picture is not clear Picture is too dark Picture is too light Solution ■ To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. ■ Clean the lens (see page 45). ■ Make sure the camera is not in Macro mode if you are more than 27.6 in. (70 cm) from your subject. ■ Place the camera on a flat, steady surface or use a tripod (especially in high-zoom settings or in low light). ■ Reposition the camera for more available light. ■ Use Fill flash (see page 6) or change your position so light is not behind the subject. ■ Move so that the distance between you and the subject is within the effective flash range. (See camera specifications starting on page 43.) ■ To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. ■ Reposition the camera to reduce the amount of available light. ■ Turn the flash off (see page 6). ■ Move so that the distance between you and the subject is within the effective flash range. (See camera specifications starting on page 43.) ■ To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. ■ In Auto mode, adjust the Exposure Compensation (see page 22). 38 www.kodak.com/go/support