Kodak D1030 User Manual - Page 13
Set the clock., Set the date., Set automatic on and off times.
View all Kodak D1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting started 3 Set the clock. Tap the down arrow to highlight Clock, then slide or tap between the left/right arrow lights to select the current time (based on a 24-hour clock). 4 Set the date. Slide between the arrow lights. Press and hold to move quickly through the time and date settings. Tap the down arrow to highlight Year/Month/Day, then slide or tap between the left/right arrow lights to select the current date (three separate settings). 5 Set automatic on and off times. Specify the times you want your frame to automatically turn on and off. NOTE: Make sure the on time is earlier than the off time. a Tap the down arrow to highlight Auto Off Auto On, then tap OK to change the option to Enabled. b Tap the down arrow to highlight Turn Frame On At, then slide or tap between the left/right arrow lights to select the On time (based on a 24-hour clock). c Tap the down arrow to highlight Turn Frame Off At, then slide or tap between the left/right arrow lights to select the Off time (based on a 24-hour clock). 6 Tap OK to save your settings and close the menu screen. To close the screen without saving, tap Exit. If your frame loses power, the clock time returns to the factory setting, and the automatic on/off times, if set, are disabled. To reset the clock and re-enable your on/off times, see Resetting the clock and calendar after losing power, page 36. www.kodak.com/go/support 7