Kodak D1030 User Manual - Page 42
Resetting the clock and calendar after losing power, Set the clock., Set the date. - manual
View all Kodak D1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Troubleshooting and support Resetting the clock and calendar after losing power If you turn off the power on the frame or otherwise lose power for half a day or more, the clock and calendar return to the factory setting and the automatic on/off times, if set, are disabled. When you turn the frame back on, the set time and date screen appears. 1 Set the clock. Tap the arrow lights or slide to select the current time. 2 Set the date. Tap the down arrow to highlight Date, then tap the arrow lights or slide to select the current date. 3 Tap the down arrow to highlight Save, then tap OK. The time is reset and the automatic on/off times (if set) are re-enabled. It is not necessary to reset the on/off times. NOTE: If you exit the set time screen without setting the time, you can manually reset the clock and re-enable the automatic on/off times (see page 6). It is not necessary to reset the on/off times. 36 www.kodak.com/go/support