Kodak I1860 User Guide

Kodak I1860 - Document Scanner Manual

Get Kodak I1860 - Document Scanner PDF manuals and user guides View all Kodak I1860 manuals
Add to My Manuals
Save this manual to your list of manuals

Kodak I1860 manual content summary:

  • Kodak I1860 | User Guide - Page 1
  • Kodak I1860 | User Guide - Page 2
    the output tray 3-7 Adjusting the side guides 3-7 Adjusting the output tray for document lengths up to 43.2 cm (17 in.) . 3-8 Positioning the output tray 3-8 Adjusting the end stop 3-9 Adjusting the angle of the output tray 3-9 The exit deflector 3-11 Adjusting the output tray for documents
  • Kodak I1860 | User Guide - Page 3
    image address levels 3-40 Manually pausing and resuming the scanner 3-41 Automatically pausing and resuming the scanner 3-41 Power Saver mode 3-42 Viewing messages 3-42 4 The Enhanced Printer/Patch Readers 4-1 Enhanced Printer overview 4-1 Printer specifications 4-2 Changing print positions
  • Kodak I1860 | User Guide - Page 4
    listing 6-5 Numerical message listing 6-10 Contacting Service 6-11 Problem solving 6-12 Appendix A Accessories A-1 Kodak Ultralightweight Paper Feed Module A-1 Kodak White Background Accessory A-1 Kodak Manual Feeder A-1 Kodak High Resolution Printer Accessory A-1 Appendix B Specifications
  • Kodak I1860 | User Guide - Page 5
    information, user precautions and how to contact Service and Support. Chapter 2, Getting Started - includes an overview of internal and external scanner components. Chapter 3, Using the Scanner - includes information on how to prepare your documents for scanning, input elevator, output tray and
  • Kodak I1860 | User Guide - Page 6
    These features are for Kodak i1800 Series Scanners, Firmware Version 2.1.1 (or higher). • Fast elevator - the elevator speed is twice as fast as the previous versions of the Kodak i1800 Series Scanners. • Quick reload - allows you to quickly reload small stacks of documents before the elevator
  • Kodak I1860 | User Guide - Page 7
    /color or black-and-white/grayscale output streams. • Includes the Brightness and Contrast Control which allows you to create custom color tables. • ISIS and TWAIN device drivers are included on a CD that is packed with each scanner. • International language support. • Ergonomic design includes an
  • Kodak I1860 | User Guide - Page 8
    slot (for FireWire card) • Microsoft Windows 2000 Professional, Windows XP (Professional/ Home) • 512 MB RAM Supporting documentation The following documentation is available to support the Kodak i1800 Series Scanners: • Quick Tips Guide, A-61556 - is a summary of this User's Guide and intended
  • Kodak I1860 | User Guide - Page 9
    or across the country. Damage incurred during transport is not covered under your warranty or Service Agreement. Kodak will help with your move by packing the scanner in packaging material that is specifically designed for the i1800 Series Scanners. Kodak will also unpack and test your equipment at
  • Kodak I1860 | User Guide - Page 10
    consumable for the Material Safety Data Sheet you are requesting. See Chapter 5, "Supplies, consumables and accessories" for consumables and catalog numbers. Users should review their practices and make compliance with these precautions a part of the job description for operation of the scanner or
  • Kodak I1860 | User Guide - Page 11
    Service Engineer. IMPORTANT: Compliance with regulations governing radio frequency emissions requires that the installation of your Kodak i1800 Series Scanners used in accordance with the instruction manual, may cause harmful interference to such trouble occurs, the user may be required to take corrective
  • Kodak I1860 | User Guide - Page 12
    environment this product may cause radio interference in which case the user may be required to take adequate measures. 此为A Korea Please note this product may cause radio interference in which case the user may be required to take adequate measures. Maschinenlärminformationsverordnung
  • Kodak I1860 | User Guide - Page 13
    . The side guides can also be locked into position if desired. 5 Feed module - provides smooth document feeding of various sizes, thicknesses and textures. 6 Paper present sensor - detects the presence of documents in the input elevator. 7 Gap release button - allows you to manually adjust the space
  • Kodak I1860 | User Guide - Page 14
    a call Kodak Service. 9 POD release latch - push up the POD release latch when you need to access the inside of the scanner. 10 Output tray and end stop - collects the scanned documents. The output tray width and end stop length can be adjusted. 11 Exit deflector - aids in document stacking. 12
  • Kodak I1860 | User Guide - Page 15
    18 Storage pocket - provides a convenient and easy-access area for storing calibration targets and documentation. A-61555 April 2009 2-3
  • Kodak I1860 | User Guide - Page 16
    access to the ink blotter strips. The ink blotter strips collect residue from the Enhanced Printer. 5 Imaging guides - the scanner has an upper and lower imaging guide. It is important to keep the imaging guides clean to obtain optimum image quality. 6 Rollers - transport the documents through the
  • Kodak I1860 | User Guide - Page 17
    sensors. These sensors are used to detect if more than one document enters the paper path at one time causing a multi-feed. Rear view Sensors 2 1 4 1 Power cord connection - provides power to the scanner. The scanner is packed with multiple power cords. Choose the power cord appropriate
  • Kodak I1860 | User Guide - Page 18
    and stopping the scanner • Document preparation • Adjusting the input elevator • Adjusting the output tray • Adjusting the height of the scanner • Scanning documents • Automatic, continuous and manual feeding • Using the touchscreen Turning the scanner on The i1800 Series Scanners have two power
  • Kodak I1860 | User Guide - Page 19
    , the following screen will be displayed. When the scanner completes the power-up sequence, the Idle screen will be displayed. See the section entitled, Using the Idle screen. IMPORTANT: Always power up the host computer to its ready state before powering up the scanner. 3-2 A-61555 April 2009
  • Kodak I1860 | User Guide - Page 20
    performance is achieved when scanning documents within the recommended document specifications listed below. Scanning documents outside of these specifications may lead to undesirable results in terms of scanner reliability, image quality, and/or consumable life. Materials: • Virgin, recycled and
  • Kodak I1860 | User Guide - Page 21
    Printer. • If in doubt about whether a specific damaged document can be transported through the scanner, place the document in a clear protective sleeve with the lead edge of the document aligned with the folded edge of the sleeve. Sleeves should be manually fed, one at a time, folded edge first
  • Kodak I1860 | User Guide - Page 22
    into position after they are adjusted. This may be helpful when the placement of print strings is important. If you want to lock the side guides into position, move any documents which may be in the input tray and move the locking switch into the locked position. A-61555 April 2009 3-5
  • Kodak I1860 | User Guide - Page 23
    the TWAIN Data source or ISIS Driver. NOTE: In this document 25 will be referred to as the highest setting and 500 as the lowest. Make this setting based on the number of documents you will place in the input elevator at one time. When set to 25 (Document Feeder or Normal), the input elevator
  • Kodak I1860 | User Guide - Page 24
    Output tray options The scanner is shipped with a standard output tray and a short document tray. Use the short document tray when scanning documents "Adjusting the short document tray" for more information. Adjusting the output tray Adjusting the side guides The output tray can be adjusted to
  • Kodak I1860 | User Guide - Page 25
    stop and installing a document extender. Reviewing the following table will help you determine the best position for your output tray and your stacking needs. Position Stacking capacity 1 Up to 250 documents 2 Up to 500 documents 3 Up to 500 documents Maximum document length with end stop
  • Kodak I1860 | User Guide - Page 26
    end stop to slightly longer than the longest document being fed. Adjusting the angle of the output tray In addition to adjusting the back of the output tray, you can adjust the front of the tray by swinging the height adjustment wire out from underneath the output tray and placing it in one of the
  • Kodak I1860 | User Guide - Page 27
    2. Swing the height adjustment wire out from underneath the output tray and insert it into one of the grooves on the printer access cover. 3. When finished using the output tray in this position, tuck the height adjustment wire back into position and lower the output tray. 3-10 A-61555 April 2009
  • Kodak I1860 | User Guide - Page 28
    position. Left position Center position Right position NOTE: If you are feeding wider or heavy documents, additional exit deflectors can be used. Contact your Kodak Field Engineer at 1-800-3KODAK3 (1-800-356-3253) to order additional exit deflectors (Part No. 3E9575). A-61555 April 2009 3-11
  • Kodak I1860 | User Guide - Page 29
    86 cm (34 in.). See the section entitled, "Ordering parts" in Chapter 5 or contact your Kodak Field Engineer at 1-800-3KODAK3 (1-800-356-3253). 1. Remove the end stop. 2. Insert the ends of the document extender into the holes on the output tray and lower the extender into position. 3-12 A-61555
  • Kodak I1860 | User Guide - Page 30
    Adjusting the short document tray 1. Remove the end stop on the output tray. 2. Slide the short document tray on the rail of the output tray and push it up to the desired position to accommodate your documents. 3. Adjust the sides guides as necessary. A-61555 April 2009 3-13
  • Kodak I1860 | User Guide - Page 31
    table can be raised approximately 25.4 cm (10 in.) from its lowest position for your comfort when you are sitting or standing at the scanner. When you are raising or lowering the workspace table, be sure that there is nothing close to the scanner that would interfere with the upward and downward
  • Kodak I1860 | User Guide - Page 32
    Position the stack of the documents, face up in the input elevator so the stack covers the paper present sensor. NOTE: For Kodak i1800 Series Scanners, Firmware Version 2.1.X (or higher): When the i1800 Series Scanner is powered-on and paper is added to the elevator tray, the elevator will rise to
  • Kodak I1860 | User Guide - Page 33
    position to allow documents to be fed one at a time. To manually feed documents: 1. Position the document you want to feed in the input elevator so that the paper present sensor is covered. 3-16 2. Touch Scan on the touchscreen. NOTE: The Kodak Manual Feeder Accessory is also available provides
  • Kodak I1860 | User Guide - Page 34
    torn. If you are in doubt about whether a damaged document can be transported through the scanner, use the gap release button and manually feed the document. Using the scanner in continuous feed mode is recommended when handling special documents. 1. Raise the input elevator to the highest position
  • Kodak I1860 | User Guide - Page 35
    - enabled When the Idle screen is displayed, you can do the following: • View the operator log • Access information about the scanner • Lower elevator • Run the scanner in count only mode • Perform a print test • Perform a patch test • Perform a self test • Clear path A-61555 April 2009
  • Kodak I1860 | User Guide - Page 36
    Offset units of measure • Enable Fragile Feed Mode The Settings screen is accessed by touching Settings on the Idle screen. The Settings screen provides scanner settings that will only need to be set infrequently. NOTE: The value displayed under the option is the current setting. A-61555 April 2009
  • Kodak I1860 | User Guide - Page 37
    Changing the alarm volume The Volume screen allows you to adjust the volume of the alarm from a Very High volume (loudest) to a Low volume (quietest) or to Off (no sound). The default is Low. 1. Touch Volume on the Settings screen to display the Volume screen. 2. Select the Volume option that you
  • Kodak I1860 | User Guide - Page 38
    a particular scanner condition is encountered such as, document jam or multi-feed, etc. 1. Touch Tone Select to display the Tones screen. 2. Select the event (e.g., Warning, Jam, etc.) that you want a tone to be set for. When you select an Event, another screen will be displayed listing a variety
  • Kodak I1860 | User Guide - Page 39
    Selecting a language The Kodak i1800 Series Scanners support several languages. Select the language you want the information on the touchscreen to be displayed in. 1. Touch Language to display the Language screen. 2. Touch the
  • Kodak I1860 | User Guide - Page 40
    document and may contain up to 30 characters (up to a maximum of 27 characters, plus 3 delimiters). An Image Address template is set up using the TWAIN Data source or ISIS Driver . See the on-line help file for more information on image addressing or the Image Processing Guide PDF
  • Kodak I1860 | User Guide - Page 41
    message will be displayed. 3. Touch Yes to change the image address status and restart the system, otherwise click Close. 4. Restart the scanner. NOTE: Disabling image addressing also disables the Patch Readers and batching. Toggle patch functionality will still be available. 3-24 A-61555 April
  • Kodak I1860 | User Guide - Page 42
    before calibrating may cause image quality issues. Use the calibration target provided with your scanner. Be sure to use a good, clean calibration target. Additional calibration targets can be ordered. Refer to the "Supplies, consumables and accessories" section in Chapter 5 for ordering information
  • Kodak I1860 | User Guide - Page 43
    Calibration UDDS calibration is used to calibrate the ultrasonic document detection system for multi-feeds. UDDS calibration is rarely needed. This calibration should only be performed if there is a feeding or multi-feed detection issue. 1. Touch Calibrate. The Calibration screen will be displayed
  • Kodak I1860 | User Guide - Page 44
    Printer units The Printer Units option is used to select the unit of measurement used in the Print Offset option. Select either English (for inches) or Metric (for millimeters). A-61555 April 2009 3-27
  • Kodak I1860 | User Guide - Page 45
    to improve paper stacking in the output tray • you are scanning batches of mixed-size documents NOTES: • Fragile Feed Mode can only be enabled when the scanner is idle. • If you use the Count Only option when Fragile Feed Mode is enabled, the throughput speed will be decreased. • Fragile Feed Mode
  • Kodak I1860 | User Guide - Page 46
    Status field Scroll arrows Function list Message window/Status bar - provides an up-to-date status of scanner activity and/or any operator messages. • Status field: displays the current scanner activity and messages. For example, if the scanner is scanning documents, Scanning, will be displayed
  • Kodak I1860 | User Guide - Page 47
    address which will be assigned to the next document. Scroll arrows - touch the up or down only those messages that have been posted since the scanner was powered on. When you turn the power off the Operator Control Panel touchscreen, see Chapter 6, Troubleshooting. 3-30 • To clear the operator log,
  • Kodak I1860 | User Guide - Page 48
    information This screen provides information about your scanner. If you are using image addressing, the last image address value is displayed on this screen. 1. Touch Information on the Idle screen to display scanner information. 2. After viewing this information, touch Close to return to the
  • Kodak I1860 | User Guide - Page 49
    input elevator. 3. Touch OK. When the scanner has scanned all documents, the total number will be displayed in the Status bar. 3-32 4. Touch End Job when finished to return to the Idle screen. NOTE: When you touch the Pause button, the feeder and transport will stop. You can continue your Count
  • Kodak I1860 | User Guide - Page 50
    The print test checks to be sure the ink jets in the Enhanced Printer are working properly. 1. Touch Print Test. The Print Test screen will be displayed. 2. Place a blank sheet(s) of paper in the input elevator. 3. Touch OK. The document(s) in the output tray will display the results of the print
  • Kodak I1860 | User Guide - Page 51
    capture application software. When the scanner is enabled, the following screen is displayed. Lowering the elevator Enabled - Image Addressing - off Enabled - Image Addressing - on Use the Lower Elevator option whenever you need to make additional room in the elevator tray for adding documents to
  • Kodak I1860 | User Guide - Page 52
    , there will be no printing on your document. 1. Enable the scanner and Print functionality via the capture application software. When the scanner is enabled, the following screen will be displayed. NOTE: The number displayed in the window is the additional offset from what was set by the host
  • Kodak I1860 | User Guide - Page 53
    already been printed. The Disable Print function is only available after the scanner is enabled (scanning started from the host PC). If you want to disable printing for the first document in the batch, then your host software should be set up to NOT automatically start scanning. The Disable Print
  • Kodak I1860 | User Guide - Page 54
    when the scanner is enabled or idle, but not when scanning. When this option is selected, the paper transport will run for a short period of time, ensuring that the paper path is clear without opening the pod. This option is active after a multifeed is detected, but not after a document jam is
  • Kodak I1860 | User Guide - Page 55
    ) in the input elevator. 3. Touch OK. When the document(s) has been scanned, the results of the patch test will be displayed on the touchscreen. The results show the number of patches and patch types that were recognized by the scanner. Performing a self test 3-38 Image Addressing - enabled Image
  • Kodak I1860 | User Guide - Page 56
    Scanning After enabling the scanner, depending on how your scanner is configured, your scanner will automatically start scanning, or appear on the touchscreen when scanning. These functions are set up by the capture software application. Options which may also appear are: • Omit patch • Omit print
  • Kodak I1860 | User Guide - Page 57
    Changing image address levels Image address levels may be changed from the screen if image addressing is enabled and/or scanning. The next image address level is highlighted. To change the level: • Touch the level button you want to assign. 3-40 A-61555 April 2009
  • Kodak I1860 | User Guide - Page 58
    the host computer can retrieve them, the scanner will automatically pause the feeder while waiting for the capture software application to read existing images. The scanner resumes scanning by automatically restarting the feeder once the capture software application has caught up. A-61555 April
  • Kodak I1860 | User Guide - Page 59
    in the input elevator. The initializing screen will appear on the touchscreen. The message window provides an up-to-date status of scanner activity and/or any operator messages. Only one message can be displayed at a time. To review previous messages use the Operator Log. 3-42 A-61555 April 2009
  • Kodak I1860 | User Guide - Page 60
    . If you attempt to print on both sides, an error will be displayed. • The minimum document height for using the printer is 10 cm (4 in.) with adjustable side guides. • The ink cartridge must be installed prior to powering on the scanner, or it could result in errors when printing is attempted. 4-1
  • Kodak I1860 | User Guide - Page 61
    locations (vertical) Print orientation Font size Ink cartridge Print side Minimum printing distance from document lead edge Static fields available Dynamic fields available Languages supported Description 1 40 12 front, 8 rear, manually set, Set by capture software application 0, 90, 180 or 270
  • Kodak I1860 | User Guide - Page 62
    print positions Changing the front horizontal print position The horizontal print position can be changed manually. You can change the front or rear print position. 1. Remove the output tray. 2. Open the print access cover. There are 12 horizontal print positions. These positions are visible
  • Kodak I1860 | User Guide - Page 63
    the rear horizontal print position 4. Close the printer access cover. 5. Reinstall the output tray. NOTE: Printing automatically stops approximately ½-inch (1.27 cm) from the trailing edge of the document, even if the information has not been completely printed. There are 8 horizontal print
  • Kodak I1860 | User Guide - Page 64
    you must restart the scanner. Moving the printer carrier and cable from front position to the rear position NOTE: Remove the ink cartridge before you begin. See the next section "Replacing the ink cartridge" for procedures. 1. Access the front printer by removing the output tray and lifting the
  • Kodak I1860 | User Guide - Page 65
    the top access cover. 5. Remove the output tray and open the printer access cover. 6. Install the printer carrier in the desired position. 7. Connect the ribbon cable. 8. Install the ink cartridge. 9. Close the top access cover. 10. Restart the scanner. 11. Run a print test. 4-6 A-61555 April
  • Kodak I1860 | User Guide - Page 66
    overall print quality Procedures for changing the ink cartridge, whether it is in the front position or rear position, are the same; with the exception of how you access the printer. 1. Lift up the top access cover (rear position) or remove the output tray and lift the printer access cover (front
  • Kodak I1860 | User Guide - Page 67
    the arrow on the printer carrier with the detent position. 8. Close the top access cover (rear position) or the printer access cover and replace the output tray (front position). 9. Run a print test. 4-8 A-61555 April 2009
  • Kodak I1860 | User Guide - Page 68
    supplier. 1. Open the pod. 2. Use the green tab to lift and remove the ink blotter strip cover to access the front blotter strips. Remove Ink Blotter Strip cover 3. Carefully pull the blotter strip(s) off the transport. You can replace one or both of the strips as necessary.. 4. Discard the soiled
  • Kodak I1860 | User Guide - Page 69
    blotter strip in the transport channel. Be sure it is properly aligned before pressing the adhesive side into the channel. 7. Press the blotter strip firmly into the channel. 8. Repeat Steps 5 - 7 for the other blotter strip, if necessary. 9. Replace the ink blotter strip cover. 10. Close the pod
  • Kodak I1860 | User Guide - Page 70
    overflow. They should be replaced when there is a build-up of ink. Replacement blotter strips may be purchased through your supplier. 1. Remove the output tray. The rear blotter strips are located in the two drawers underneath the baffle. 2. Open the one of the drawers by pushing it in a little and
  • Kodak I1860 | User Guide - Page 71
    document preparation. There are four off-center, permanently mounted Patch Readers. They can be independently enabled or disabled by your capture software reading problems are See Kodak spec. Patch 4 Patch 6 Toggle Patch - the Toggle patch is a Type 4 patch that is used to trigger the scanner
  • Kodak I1860 | User Guide - Page 72
    operation is defined as Level 3 and a Transfer Patch is used, the next document will be assigned Level 3. See Kodak publication A-61599, Patch Code Information, for complete information about patch placement and specifications. Patches can be tested using the Patch Test on the touchscreen. See
  • Kodak I1860 | User Guide - Page 73
    list of cleaning tools and materials • a list of supplies, consumables and accessories • cleaning procedures for the scanner • replacement procedures for customer-replaceable parts IMPORTANT: Scanner should take approximately 5 to 10 minutes. Some document types generate more paper dust and
  • Kodak I1860 | User Guide - Page 74
    or drive rollers and cleaning the imaging guides. Use the chart below as a guide to the order and how frequently you should clean your scanner. Procedure Vacuum output tray and input areas (input elevator and transport) Clean all rollers Vacuum transport area Remove and vacuum under background
  • Kodak I1860 | User Guide - Page 75
    , consumables and accessories Ordering parts Contact your scanner supplier to order supplies. Supplies/Consumables Kodak Feeder Consumables Kit for i600/i1800 Series Scanners Kodak Feeder Kit for Ultralightweight Paper for i600/i1800 Series Scanners Kodak Extra-Large Feeder Consumables Kit for
  • Kodak I1860 | User Guide - Page 76
    it is recommended that you use a Staticide wipe to clean the screen and dry it with a lint free cloth. Vacuuming the output tray and input elevator 1. Power down the scanner. 2. Remove the output tray. 3. Thoroughly vacuum the output tray area and the input elevator area. 5-4 A-61555 April 2009
  • Kodak I1860 | User Guide - Page 77
    Cleaning the rollers Cleaning the rollers includes all of the rollers in the transport area, the separation roller tires and the feed module tires. 1. Pull up on the pod release lever and open the pod. 2. Manually rotate and wipe the rollers with a roller cleaning pad. IMPORTANT: The roller
  • Kodak I1860 | User Guide - Page 78
    Cleaning the separation roller tires 4. Pull the separation pad holder forward and remove the separation roller. 5. Manually rotate and wipe the separation roller tires with a roller cleaning pad. For best results wipe parallel to the ribs in order to remove any residue
  • Kodak I1860 | User Guide - Page 79
    Cleaning the feed module tires 9. Lift up the printer access cover. 10. Push the release lever down (located underneath the printer access cover) to release and remove the feed module. A-61555 April 2009 5-7
  • Kodak I1860 | User Guide - Page 80
    11. Manually rotate and wipe the feed module tires with a roller cleaning pad. For best results wipe parallel to the ribs in order to remove any residue
  • Kodak I1860 | User Guide - Page 81
    Vacuuming under the background strips the reflective tape near the front of the pod the three multifeed sensors at the base of the transport and the pod 1. Using the green tabs pull off the upper and lower background strips and set them aside. A-61555 April 2009 2. Vacuum the areas
  • Kodak I1860 | User Guide - Page 82
    1. Open the pod. 2. Wipe the upper and lower imaging guides with a Staticide wipe. IMPORTANT: Staticide wipes contain isopropanol which can for more information. 3. Wipe the upper and lower imaging guides again with an almost-dry Staticide wipe to remove any streaks. 4. When finished, close the
  • Kodak I1860 | User Guide - Page 83
    1. Open the pod. 2. Turn the screw on each end of the upper imaging guide and remove it from its position. 3. Clean the imaging guide thoroughly with a Staticide wipe. 4. Wipe the imaging guide again with an almost-dry Staticide wipe to remove any streaks. IMPORTANT: There is no cover glass between
  • Kodak I1860 | User Guide - Page 84
    the areas between the lamps, then use a Staticide wipe to thoroughly clean the glass plate between the lamps. 3. Clean the lower imaging guide thoroughly with a Staticide wipe. 4. Wipe the imaging guide again with an almost-dry Staticide wipe to remove any streaks. 5. Reinstall the lower imaging
  • Kodak I1860 | User Guide - Page 85
    cleaning procedures, reinstall the output tray. Running a transport cleaning sheet 8. Turn on the scanner. The transport should be cleaned with a Transport Cleaning Sheet fed several times. 1. Remove the wrapping from the Transport Cleaning Sheet. 2. Adjust the side guides to the widest position
  • Kodak I1860 | User Guide - Page 86
    cleaning steps 5. Touch Scan. 6. Remove the transport cleaning sheet from the output tray and place it in the center of the input new one. When finished running the transport cleaning sheet: 1. Open the pod. 2. Wipe the exposed side of the upper and lower imaging guides with a lint-free cloth. 3.
  • Kodak I1860 | User Guide - Page 87
    parts. Use the list below as a guideline for frequency of replacement. • Feed module tires and separation roller tires - tire life will vary depending upon paper types, environment and cleanliness. Nominal tire life is approximately 600,000 documents; results will vary. Degradation of feeder
  • Kodak I1860 | User Guide - Page 88
    that the feed module is securely in place and moves freely after you install it. • Close the pod and the printer access cover. • Reinstall the output tray. Align these areas 5-16 A-61555 April 2009
  • Kodak I1860 | User Guide - Page 89
    tire by gently pulling it over the core. The tires do not need to be installed in any specific orientation. IMPORTANT:Do not overstretch the tire; it may tear. A-61555 April 2009 10. Replace the core assembly in the lower feed module housing. 11. Repeat the replacement procedure outlined above for
  • Kodak I1860 | User Guide - Page 90
    in place and moves freely after you install it. Align these areas 15. Close the pod. 16. Close the printer access cover. 17. Reinstall the output tray. 5-18 A-61555 April 2009
  • Kodak I1860 | User Guide - Page 91
    Replacing the separation roller or separation roller tires 1. Open the pod. 2. Pull the separation pad holder forward and remove the separation roller. If you want to replace the separation roller, do Steps 3 and 4. If you want to replace the separation roller tires, go to Step 5. 3. Insert the
  • Kodak I1860 | User Guide - Page 92
    the preseparation pad Change the pre-separation pad when the frequency of multi-fed documents increases. 1. Open the pod. 2. Remove the pre-separation pad by lifting the pad up and out of position. Replacing the imaging guides 3. Install the new pre-separation pad. Be sure it snaps into place
  • Kodak I1860 | User Guide - Page 93
    Troubleshooting This chapter provides: • Information on how to access the Operator Log. • A problem solving chart. • A message listing of possible errors you may encounter while using the scanner messages since the last power-cycle of the scanner, while the Scan Validation Tool can display all
  • Kodak I1860 | User Guide - Page 94
    Accessing the Operator Log from the Scan Validation tool 1. Select Start>Programs>Kodak>Document Imaging>Scan Validation Tool. 2. From the Driver Types box, select TWAIN. 3. From the Drivers box, select Kodak Scanner: i1800 and click OK. 4. Select the Scanner icon. 6-2 A-61555 April 2009
  • Kodak I1860 | User Guide - Page 95
    5. From the main screen, click Settings. The Settings screen will be displayed. 6. Select Device. A-61555 April 2009 6-3
  • Kodak I1860 | User Guide - Page 96
    log entries are displayed at the top of the list. See the following Message Listing for an explanation of error conditions. NOTE: The Kodak Field Engineer may request the error logs be saved and emailed to them as part of remote problem determination. Use the button to create a compressed log
  • Kodak I1860 | User Guide - Page 97
    Calibration succeeded Call Service Cannot calibrate with white background Cannot run with both printers installed Check document preparation Check imaging guides and lamps Clean lower imaging guide ID# Operator Message 381 The Background Accessory was changed while the scanner was powered on
  • Kodak I1860 | User Guide - Page 98
    failed. • Clean the imaging guides. See Chapter 5, Maintenance for procedures. • Try to calibrate the scanner again. Be sure you are using the correct calibration target. See Chapter 3, "Calibrating the Scanner". • If the problem persists, call Service. 111 Informational message. The front
  • Kodak I1860 | User Guide - Page 99
    illegal combinations. Refer to the Image Processing Guide for valid values. 30 A document is lodged in the transport. • Remove the documents that have been scanned from the output tray. • Open the pod. • Remove any jammed documents from inside the transport. • Close the pod. NOTE: The following
  • Kodak I1860 | User Guide - Page 100
    See Chapter 3, "Calibrating the Scanner". • If the problem persists, call Service. 113 Informational message. The rear image path has been successfully calibrated. Many ID numbers Documents passed through the transport but no images were created. • Clean document sensors. • Make sure the leading
  • Kodak I1860 | User Guide - Page 101
    try again. • If the problem persists, call Service. 332 Informational message. The scanner ultrasonics has been successfully calibrated. 21 • Perform an Ultrasonics calibration. See Chapter 3, "Calibrating the scanner" for procedures. 23, 24, 334 A multi-feed document condition has been detected
  • Kodak I1860 | User Guide - Page 102
    26 Pod door closed 30 Jam in transport 35 Document too long 36 Document too long 48 Paused waiting for host 63 Scanner paused for rotation or host processing 90 Cannot run with both printers installed 91 Please update firmware before scanning 105 Calibration succeeded 106 Calibration
  • Kodak I1860 | User Guide - Page 103
    333 UDDS calibration failed 336 Transport timeout 337 Requested pages scanned 355 Lamps timed out 359 Lamps not ready for scanning 381 Background accessory changed while powered up Many IDs Call Service Refer to the section entitled, "Contacting Support" in Chapter 1 for phone numbers
  • Kodak I1860 | User Guide - Page 104
    chart below as a guide to check possible solutions to problems you may encounter when using the Kodak i1800 Series Scanners. Problem Possible Solution Scanner does not power on Make sure that: • the power cord is plugged securely into the receptacle in the back of the scanner. • the wall outlet
  • Kodak I1860 | User Guide - Page 105
    are removed; lead edges are aligned, etc.) • the output tray and side guides are adjusted for the length and width of the documents being scanned. • all jammed documents have been removed from the transport area. • documents meet specifications for size and weight. • the sensors are clean. • the
  • Kodak I1860 | User Guide - Page 106
    in the scanner. Instructions for installing the White Background Accessory are included with the kit. CAT No. 894 9000 Kodak Manual Feeder When the need arises to manually feed documents, the Kodak Manual Feeder for the i1800 Series Scanners provides a flat work surface. The Manual Feeder can be
  • Kodak I1860 | User Guide - Page 107
    pages per minute (landscape) i1860 Scanner: Duplex color scanner with an automatic document feeder including the enhanced printer, 200 pages per minute (landscape) Dual Tricolor Plus CCD Grayscale output bit depth is 256 levels (8-bit) Color capture bit depth is 40-bit (10 bits per red, green, blue
  • Kodak I1860 | User Guide - Page 108
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108