Kodak I1860 User Guide - Page 91
Replacing the separation roller or separation roller tires, To replace the tires
View all Kodak I1860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Replacing the separation roller or separation roller tires 1. Open the pod. 2. Pull the separation pad holder forward and remove the separation roller. If you want to replace the separation roller, do Steps 3 and 4. If you want to replace the separation roller tires, go to Step 5. 3. Insert the new separation roller. Be sure to line up the slots on the separation roller with the holders. 4. Push the separation roller holder back in place and close the pod. To replace the tires: 5. Replace each tire by sliding the tire off the core. 6. Install each new tire by gently pulling it over the core. IMPORTANT:Do not overstretch the tire; it may tear. 7. Reinstall the separation roller. Be sure to line up the slots on the separation roller with the holders. 8. Push the separation roller holder back in place and close the pod. A-61555 April 2009 5-19