Kodak I260 User Guide - Page 30
Cleaning the drive rollers and transport area, to fit it into position.
UPC - 041771844417
View all Kodak I260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3. Manually rotate and wipe the feed module s with a roller cleaning pad. 4. Inspect the feed module. If the feed module tires show signs of wear or damage, replace the tires or the feed module. 5. Remove any dust or debris from the tray area under the feed module and the front roller cover. 6. Insert the feed module by aligning the pins and pushing it toward the right to fit it into position. 7. Re-install the front roller cover. 8. Go to the next section to clean the drive rollers and transport area. Cleaning the drive rollers and transport area 1. Manually rotate and wipe the drive rollers with a roller cleaning pad. 2. Clean any dust or debris in the slots around the drive rollers. 26 A-61167 April 2005
26
A-61167
April 2005
3.
Manually rotate and wipe the feed module s with a roller cleaning pad.
4.
Inspect the feed module.
If the feed module tires show signs of wear or damage, replace the tires or
the feed module.
5.
Remove any dust or debris from the tray area under the feed module and
the front roller cover.
6.
Insert the feed module by aligning the pins and pushing it toward the right
to fit it into position.
7.
Re-install the front roller cover.
8.
Go to the next section to clean the drive rollers and transport area.
Cleaning the drive rollers
and transport area
1.
Manually rotate and wipe the drive rollers with a roller cleaning pad.
2.
Clean any dust or debris in the slots around the drive rollers.