Kodak LS743 User Manual - Page 47
Camera ready light status - firmware
UPC - 041778662274
View all Kodak LS743 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Camera ready light status Troubleshooting Ready light Status Cause Ready light glows steady green. Shutter button is pressed halfway down. Focus and exposure are set. Ready light blinks green. Picture is being processed and saved to the camera. Pictures are being transferred to computer; camera is connected. Camera firmware upgrade is in process. Ready light glows steady orange. Camera is in Favorites mode. Ready light blinks orange. Flash is not charged. Wait. Resume picture taking when the light stops blinking and turns off. Auto exposure or auto focus are not locked. Release the Shutter button and recompose the picture. Ready light glows steady red. Camera's internal memory or card is full. Transfer pictures to the computer (page 36), delete pictures from the camera (page 24), switch storage locations (page 19), or insert a card with available memory (page 7). Camera processing memory is full. Wait. Resume picture taking when the light turns green. Card is read-only. Change storage location to internal memory (page 19), or use a different card. Memory card speed is slow. Card cannot be used to take videos. Change storage location to internal memory (page 19). Use this card to take pictures only. Ready light blinks red Battery is low or exhausted. Recharge the battery (page 2). and camera turns off. 41