Kodak LS753 User Manual - Page 47
Picture quality problems
UPC - 041771058166
View all Kodak LS753 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Troubleshooting If... Slide Show does not run on an external video device Try one or more of the following ■ Adjust the camera Video Out setting (NTSC or PAL, page 20). ■ Make sure the external device settings are correct (see the device's user's guide). Picture quality problems If... Try one or more of the following The picture is too dark ■ Use Fill flash (page 14) or change your position so light is or underexposed not behind the subject. ■ Move so that the distance between you and the subject is within the effective flash range (see page 14). ■ To automatically set exposure and focus, press the Shutter button halfway and hold. When the ready light glows green, press the Shutter button completely down to take the picture. ■ Increase Exposure Compensation (page 16) and try again. The picture is too light ■ Turn flash off (page 14). ■ Move so that the distance between you and the subject is within the effective flash range (see page 14). ■ To automatically set exposure and focus, press the Shutter button halfway and hold. When the ready light glows green, press the Shutter button completely down to take the picture. ■ Decrease Exposure Compensation (page 16) and try again. ■ Check if you are in Beach or Snow scene mode (page 10). The picture is not clear ■ To automatically set exposure and focus, press the Shutter button halfway and hold. When the ready light glows green, gently press the Shutter button completely down to take the picture. ■ Clean the lens (page 49). ■ Make sure camera is not in Close-up mode if you are further than 39 in. (100 cm) from your subject. ■ Place the camera on a flat, steady surface or use a tripod. 41