Konica Minolta AccurioPress 6120 EF-105 AccurioPress 6136/6136P/6120 User Guid - Page 15
Installing Parts in the Tray (when Paper Feeder Unit PF-710 is installed
View all Konica Minolta AccurioPress 6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2.2 Installation Procedures 2 2.2.2 Installing Parts in the Tray (when Paper Feeder Unit PF-710 is installed) Depending on the size of the envelope to be used, the attached auxiliary guides need to be installed on Paper Feeder Unit PF-710. For details on the envelope size, refer to page 5-2. NOTICE Trays cannot be withdrawn when the machine is not powered. Plug the power cord of the machine into the outlet, turn on the main power switch, then the sub power switch before performing the installation. Using Envelopes of 100 to 139.7 mm in Width The following parts need to be installed when envelopes of the above size are used. - Side auxiliary guide (2 pieces) - Positioning screws (4 screws) To use envelopes of 139 mm or smaller, use the side auxiliary guides and the small size guides of Paper Feeder Unit PF-710. 1 Pull out tray 4. 2 Move the 2 small size guides (2 pieces) to the positions in the picture and remove the 4 screws (2 screws for each position). 3 Install the positioning screws (2 screws for each posi- tion). AccurioPress 6136/6136P/6120 2-6