Konica Minolta Fujitsu fi-7280 Getting Started Guide - Page 5
Connecting the Cables
View all Konica Minolta Fujitsu fi-7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2. Unlock the transport lock switch. For fi-7260/fi-7280, there is a carrier unit inside the flatbed which is fixed in place to prevent damage during transportation. Slide the transport lock switch on the front. Locked Unlocked Transport lock switch 3. Attach the ADF paper chute (Feeder). Insert the tabs into the slots on the back of the scanner in the direction indicated by the arrow 1 , and tilt the ADF paper chute backwards in the direction indicated by the arrow 2 until it locks in place. Tab ADF paper chute (Feeder) Side guides 1 2 ATTENTION Insert the ADF paper chute (Feeder) firmly so that there is no space between the scanner. Connecting the Cables Connect each cable in the following procedure. AC cable Power connector 4 2 AC adapter 4 3 USB connector 1 2 USB cable CAUTION Only use the supplied AC adapter. Not doing so may cause the scanner to malfunction. Furthermore, do not use the supplied AC adaptor for other products. 1. Confirm that the computer is turned off. 2. Connect the USB cable to the USB connector of the scanner and USB port of the computer. ATTENTION zUse the supplied USB cable. zIf you connect the scanner with USB 3.0/ 2.0, it is required that the USB port and the hub be compliant with USB 3.0/2.0. The scanning speed slows down when you connect the scanner with USB 1.1. zConnect it with the USB mark facing up. USB mark 5