Konica Minolta bizhub 363 AU-211P Authentication Unit User Guide for bizhub 22 - Page 58
Using Scan To Home
View all Konica Minolta bizhub 363 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
How to Use the Authentication Unit 3 3.8.4 Using Scan To Home The following explains how to use Scan To Home on the MFP. ! Detail If the correct settings are configured to use Scan To Home, [Home] appears on the Fax/Scan screen to send data to the user's Home folder. 1 Press the [Fax/Scan] key on the control panel. 2 Press [Home]. 3 Specify scan conditions in [Scan Settings], [Original Settings], and [Communication Settings]. 4 Load the original and press the [Start] key on the control panel. This scans the original and sends data to the user's Home folder. 2 Note For details on scan conditions, refer to the User's Guide [Network Scan/ Fax/Network Fax Operations] supplied together with the MFP. AU-211P 57
How to Use the Authentication Unit
3
AU-211P
57
3.8.4
Using Scan To Home
The following explains how to use Scan To Home on the MFP.
!
Detail
If the correct settings are configured to use Scan To Home, [Home]
appears on the Fax/Scan screen to send data to the user's Home folder.
1
Press the [Fax/Scan] key on the control panel.
2
Press [Home].
3
Specify scan conditions in [Scan Settings], [Original Settings], and
[Communication Settings].
4
Load the original and press the [Start] key on the control panel.
This scans the original and sends data to the user's Home folder.
2
Note
For details on scan conditions, refer to the User's Guide [Network Scan/
Fax/Network Fax Operations] supplied together with the MFP.