Konica Minolta bizhub 4052 bizhub 4752/4052 Security Function User Guide - Page 22
CS Remote Care function, Terminating a Session and Logging out - default admin password
View all Konica Minolta bizhub 4052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1.4 Miscellaneous 1 CS Remote Care function CS Remote Care is a system that manages the machine through transmission and reception of various types of data for managing the machine between the machine and the CS Remote Care center computer via a telephone/fax line, a network, or E-mail. Functions are disabled to access the LAN from the telephone line and to directly transfer received fax. When the Enhanced Security Mode is set to [ON], the following functions are no longer usable: instructing to rewrite the firmware, sending and receiving account counter information, rewriting settings of the machine, and the Counter Remote Control function. Terminating a Session and Logging out The machine allows the operator to automatically log out from or terminate a session, if it is unable to detect an operation on the control panel or a communication packet on the network. Additionally, if a user changes the user password on the control panel while the same user accessing the machine via Web Connection, the session of Web Connection is terminated. The following shows the setting range and the default setting of each function. Set the time according to the environment in which the machine is used. The administrator should explain to the user that the following settings are made. The administrator should also explain to the user immediately as soon as the setting has been changed. Function name/software, etc System Auto Reset Auto Logout (Web Connection) Data Administrator Description Setting range • [1] to [9] minutes, Default setting: [1] minute Setting procedure • [Utility] - [Administrator Settings] - [System Settings] - [Reset Set- tings] - [System Auto Reset] Setting range • [Admin. Mode Logout Time]: [1] to [60] minutes Default setting: [10] minutes • [User Mode Logout Time]: [1] to [60] minutes Default setting: [60] minutes Setting procedure • Start the Web Connection and, in the Administrator Mode, select [Security] - [Auto Logout]. Default setting: [60] minutes (No change can be made in the setting) The time setting represents consideration for the time-consuming task, such as downloading the registered information. Be careful about leaving your seat, because the time setting is rather long. Authentication error during external server authentication If a user is unable to log in successfully during user authentication using the external server authentication, possible causes include the status of connection to the external server, the condition of the external server (the server is down), and the status of user registration with the external server such as the number of users to be controlled by the machine reaching its limit and the user password quality on the external server. The administrator should check these points and make the appropriate settings. bizhub 4752/4052 1-18