Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Utility Keys User Gui - Page 49
Extended Network Settings]
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5.5 [Network Settings] 5 [Extended Network Settings] To display: [Utility] - [Administrator Settings] - [Network Settings] - [Extended Network Settings] Configure the settings for using this machine in a wireless network environment. Settings [Network Interface Settings] [AP Mode Settings] [SSID] [Authentication/Encryption Algorithm] [40 to 20 MHz Auto Switch] [Wireless Channel] [ANY Connection] [MAC Address Filtering] Description Select the operation mode to connect this machine to the network. • [Wired LAN only]: Select this option to connect this machine to a wired LAN environment. • [Wireless LAN (Client Mode)]: Select this option to operate this machine as an adapter of the wireless LAN access point. • [Wireless LAN (AP Mode)]: Select this option to operate this machine as a wireless LAN access point. The machine can also be connected to a wired LAN environment and used together with a wireless connection. • [Wireless LAN (Wi-Fi Direct)]: Select this option to use this machine as a wireless LAN Direct group owner. [Wired LAN only] is specified by default. If [Wireless LAN (AP Mode)] or [Wireless LAN (Wi-Fi Direct)] is selected in [Network Interface Settings], configure a setting to use this machine as the wireless LAN access point. Enter the SSID of this machine (using up to 32 characters). If [Wireless LAN (AP Mode)] is selected in [Network Interface Settings], the SSID of the access point is used. If [Wireless LAN (Wi-Fi Direct)] is selected in [Network Interface Settings], the SSID for Wi-Fi Direct connection is used. The SSID specified here is displayed on the Wi-Fi Direct (setting) screen of the terminal that is compatible with WiFi Direct. If you cannot connect to this machine by specifying the SSID on the Wi-Fi Direct (setting) screen, specify [Virtual SSID] on the Wi-Fi (setting) screen to establish a connection. Configure settings for the authentication or encryption algorithm. • [Algorithm Selection]: Select the algorithm used for authentication or en- cryption. [No Authentication/Encryption] is specified by default. • [WEP Key Settings]: Configure a WEP key setting when [WEP] is selected in [Algorithm Selection]. [Key Input Method]: Select a WEP key input method. [Use key settings]: Enter a WEP key. If multiple WEP keys are registered, select which key is to be used. • [Passphrase Settings]: Specify the passphrase when an algorithm other than [WEP] is selected in [Algorithm Selection]. [Key Input Method]: Select a method to enter a passphrase. [Passphrase]: Enter the passphrase. [Passphrase Auto Update]: Select whether or not to automatically update the passphrase. [ON] is specified by default. [Update interval]: Specify the interval to update the passphrase. [60] minutes is specified by default. Select [Enable] to attempt high-speed communication at 40 MHz. [Disable] is specified by default. Set a wireless LAN channel. [Auto] is specified by default. Select whether or not to allow ANY connection. This option is displayed if [Wireless LAN (AP Mode)] is selected in [Network Interface Settings]. [Allow] is specified by default. Restricts a wireless LAN adapter that can be connected to the access point using the MAC address. Enter the MAC address of the wireless LAN adapter that can be connected to the access point. MAC addresses of up to 16 devices can be registered. This option is displayed if [Wireless LAN (AP Mode)] is selected in [Network Interface Settings]. [Description of Utility Keys] 5-18