Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline User Manual - Page 34
Lift the PowerSquare Main Deck, When to do, CAUTION, Before you begin, Procedure
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4 - Standard Tasks - Lift the PowerSquare Main Deck Lift the PowerSquare Main Deck When to do If a machine error occurs, or for maintenance. • To access the stitch head • To access the former area • To access the trim area CAUTION: Do not lift the main deck if the error message FOLD BLADE NOT PARKED is shown on the screen. Folder Cover open Clincher Frame lifted Main Deck FIGURE 13. Lift the PowerSquare Main Deck Before you begin Check the touch screen for the error message FOLD BLADE NOT PARKED. If the error message is displayed: If the error message is not displayed: Open the folder cover, remove any paper, close the folder cover. Touch START , then follow the instructions on the screen. Wait for the message to clear. Then continue with the procedure below. Continue with the procedure below. Procedure Step 1 Action Open the folder cover. Information See "Open and Close the Folder Cover" on page 28. 30 Watkiss PowerSquare™224 User Manual