Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 Offline User Manual - Page 95
Close the PowerSquare, Feed the Stitch-wire, See Lower the Clincher Frame
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
6 - Maintenance - Install New Stitch-wire Close the PowerSquare Step 1 2 3 Action Close the stitch wire cabinet. Lower the PowerSquare main deck. Lower the clincher frame. 4 Close the folder cover. Information See "Lower the Clincher Frame" on page 29. Feed the Stitch-wire Step 1 2 3 4 5 Action Information Touch START Set the number of stitches to 6. Touch BASIC > STITCHES. Hand-feed an A4 or larger size test Enter the correct settings on the job. touch screen, according to the size and thickness of the job. The stitch-wire loads automatically during the stitch head cycle. Check the stitch-wire is loaded. Check that a stitch is made. If needed, repeat the previous step. If a stitch is still not made, repeat the procedure "Install the Stitchwire into the Stitch Head" on page 90. Reset the number of stitches on the touch screen. Watkiss PowerSquare™224 User Manual 91