Konica Minolta bizhub PRESS C6000 IC-306 Procedure to upgrade to Version 2.0
Konica Minolta bizhub PRESS C6000 Manual
View all Konica Minolta bizhub PRESS C6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta bizhub PRESS C6000 manual content summary:
- Konica Minolta bizhub PRESS C6000 | IC-306 Procedure to upgrade to Version 2.0 - Page 1
31 to version1.55. • Media Package - System Software Package - System Software version 2.0 for installation on the Fiery PRO80 following the BIOS upgrade procedure. - User Software Package - User Software for installation on client computers; User documentation CD; printed release notes; additional - Konica Minolta bizhub PRESS C6000 | IC-306 Procedure to upgrade to Version 2.0 - Page 2
1. Shut down and then open the Fiery PRO80 (see the Installation and Service Guide). To access the DIMM sockets on the motherboard, you must remove the the socket so that the positive (+) side of the battery faces up. Press the battery down into the socket until it snaps securely into place. 5. - Konica Minolta bizhub PRESS C6000 | IC-306 Procedure to upgrade to Version 2.0 - Page 3
THE BIOS 1. Verify the current BIOS version. Print a Configuration page and verify the BIOS version shown in the BIOS Setup select YES by pressing the corresponding button on the Control Panel. The upgrade takes approximately 2 minutes, but may take longer for some systems. The following messages - Konica Minolta bizhub PRESS C6000 | IC-306 Procedure to upgrade to Version 2.0 - Page 4
simulation and output profiles. Also, print the following (if possible): • Configuration page-lists any installed options and records the customer's current Setup configuration the message "System software is copied to the system. Remove media and press OK to reboot," remove the System Software DVD, - Konica Minolta bizhub PRESS C6000 | IC-306 Procedure to upgrade to Version 2.0 - Page 5
battery. To troubleshoot, see the Installation and Service Guide. NOTE: This installation segment takes approximately 30 minutes. 10. At the message "User Software installation complete. Remove CD/DVD. Press OK to reboot," remove the User Software DVD. The system ejects the User Software DVD and - Konica Minolta bizhub PRESS C6000 | IC-306 Procedure to upgrade to Version 2.0 - Page 6
Fiery PRO80. Using incompatible versions of the system and user software may result in system problems. The latest user software is provided on the User Software media included with this upgrade kit. TO VERIFY THE PRODUCT UPGRADE • Print a Configuration page and verify the following: • Server Info - Konica Minolta bizhub PRESS C6000 | IC-306 Procedure to upgrade to Version 2.0 - Page 7
10 minutes, the BIOS upgrade has failed due to a faulty system component. Refer to the Fiery PRO80 Installation and Service Guide for information on troubleshooting the faulty component. You are attempting to install version 2.0 of system software on a Fiery PRO80 that does not have BIOS version
Part Number: 45097576
February 17, 2011
Copyright 2011 © Electronics for Imaging, Inc.
*45097576*
Upgrading the Fiery PRO
80
80C-KM or
Fiery PRO
80
70-60C-KM Color Server to
System Version 2.0
Overview
This document describes how to upgrade the Fiery PRO
80
80C-KM or Fiery PRO
80
70-60C-KM Color Server to system software version 2.0.
Notify the network administrator at the customer site that some archived jobs may no longer
print after you install version 2.0 system software.
N
OTE
:
The term “Fiery PRO
80
” is used in this document to refer to the Fiery PRO
80
80C-KM
or Fiery PRO
80
70-60C-KM Color Server.
Contents of this kit
In addition to this document, this kit contains:
•
Two 1GB DIMMs — for upgrading the memory from 2GB to 4GB.
•
BIOS Upgrade CD — for upgrading the BIOS from version 1.31 to version 1.55.
•
One-time use dongle — for upgrading the BIOS from version 1.31 to version1.55.
•
Media Package
–
System Software Package — System Software version 2.0 for installation on the
Fiery PRO
80
following the BIOS upgrade procedure.
–
User Software Package — User Software for installation on client computers; User
documentation CD; printed release notes; additional documentation.
Procedures
The list below is a summary; see the complete procedures in the following pages.
To upgrade the Fiery PRO
80
, perform the following procedures
in the order shown below
.
1.
Install the additional DIMMs (see
page 2
).
2.
Upgrade the BIOS (see
page 3
).
3.
Install system software (see
page 4
).
Installing system software deletes everything on the HDD. Coordinate with the network
administrator at the customer site before installing system software.
4.
Verify the product upgrade (see
page 6
).