Konica Minolta magicolor 1600W magicolor 1600W User Guide - Page 113

Use KONICA MINOLTA-approved, with new, dry media. - print when color toner is out

Get Konica Minolta magicolor 1600W PDF manuals and user guides View all Konica Minolta magicolor 1600W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 113 highlights

Symptom Cause Solution The print or One or more of the Remove the toner cartridges and color density toner cartridges may check for damage. If it is damaged, is uneven. be defective or low. replace it. The imaging cartridge Remove the imaging cartridge and is defective. check for damage. If it is damaged, replace it. The printer is not level. Place the printer on a flat, hard, level surface. Irregular print or mottled image appears. The media is moist from humidity. Adjust the humidity in the media storage area. Remove the moist media and replace it with new, dry media. Unsupported media (wrong size, thickness, type, etc.) is being used. Use KONICA MINOLTA-approved media. See "Print Media" on page 4-2. Also, refer to http://printer. konicaminolta.com for a complete list of currently approved media. One or more of the Remove the toner cartridges and toner cartridges may check for damage. If it is damaged, be defective. replace it. The imaging cartridge Remove the imaging cartridge and is defective. check for damage. If it is damaged, replace it. There is The media is moist insufficient from humidity. fusing or the Unsupported media image (wrong size, thick- comes off ness, type, etc.) is when being used. rubbed. Remove the moist media and replace it with new, dry media. Use KONICA MINOLTA-approved media. See "Print Media" on page 4-2. Also, refer to http://printer. konicaminolta.com for a complete list of currently approved media. Media type is set incorrectly. When printing envelopes, labels, postcards, thick stock, or letterheads, specify the appropriate media type in the printer driver. 7-26 Solving Problems with Printing Quality

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
Solving Problems with Printing Quality
7-26
The print or
color density
is uneven.
One or more of the
toner cartridges may
be defective or low.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
The imaging cartridge
is defective.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
Irregular
print or mot-
tled image
appears.
The media is moist
from humidity.
Adjust the humidity in the media stor-
age area.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Print Media” on page 4-2.
Also, refer to http://printer. konicami-
nolta.com for a complete list of cur-
rently approved media.
One or more of the
toner cartridges may
be defective.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
The imaging cartridge
is defective.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
There is
insufficient
fusing or the
image
comes off
when
rubbed.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Print Media” on page 4-2.
Also, refer to http://printer. konicami-
nolta.com for a complete list of cur-
rently approved media.
Media type is set
incorrectly.
When printing envelopes, labels, post-
cards, thick stock, or letterheads, spec-
ify the appropriate media type in the
printer driver.
Symptom
Cause
Solution