Konica Minolta magicolor 1690MF magicolor 1690MF Reference Guide - Page 200

DNS CONFIG. Purpose Options Default Range Sets whether or not the DNS server setting is to be specified. If specifying the DNS server setting, the SMTP server can be specified as a host name when using network scanning. If ENABLE is selected, type in the IP address of the DNS server. If DISABLE is selected, the DNS server cannot be referenced. DISABLE/ENABLE DISABLE (If DNS CONFIG. is set to ENABLE) 0-255 for each xxx triplet Notes Use the keypad to input each number; use the * and ) keys to move between triplets. A single digit number, such as "1", cannot be input as "001". Align the number on the left and input "1" as "1 _ _". Use the * and ) keys to move between triplets. The Back key can also be used for deleting. To cancel DNS CONFIG. menu, hold down the Back key for more than one second, and then press the Back key again after all settings have been cleared. After changing the settings, the machine must be turned off, then on again. " When using network scanning and when specifying the SMTP server as a host name instead of as an IP address, be sure to select ENABLE, and then specify the IP address of the DNS server. DHCP Purpose Options Default If there is a DHCP server on the network, specifies whether the IP address and other network information is automatically assigned by the DHCP server. DISABLE/ENABLE ENABLE NETWORK SETTING Menu 5-9