Konica Minolta magicolor plus magicolor plus Copyboard M-12 Series Tool Box So
Konica Minolta magicolor plus Manual
View all Konica Minolta magicolor plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta magicolor plus manual content summary:
- Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 1
Copyboard M-12 Series Software Operation Manual We greatly appreciate your purchase of this PLUS Vision product. In order to take full advantage of the features of the software supplied with the M-12 and M-125 Copyboards, please read this software operation manual carefully before use. After - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 2
to change without notice. (3) Great care has been taken in the preparation of this manual; however, should any questionable points, errors, or omissions be apparent, please contact us. (4) Notwithstanding part (3), PLUS Vision Corp. will not be responsible for any claims or lost profits or other - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 3
PLUS Vision. The security settings can also be made via USB memory. Operating Environment Supported OS: Supported PC : CPU: Memory: Connector: Available hard disk space: Display resolution: Peripheral devices: Web browser: Microsoft Windows 2000 Professional (Service - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 4
trouble reports, and other matters, and the scope of our support shall be limited to the functions and operation of this software. Problems the aforementioned conditions of use. * Upon downloading this software from the PLUS Vision Web site, or installing it from the CD-ROM, the customer is deemed - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 5
TOOLBOX", TWAIN driver and USB driver are installed simultaneously. ■ User's Manual When clicked, the User's manual (in PDF format) open. ■ Software Manual (this manual) When clicked, the PLUS TOOLBOX software's operating instructions (in PDF format) open. ■ Acrobat Reader This is an application - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 6
. 4. Close all other applications that are running. Installation of the PLUS TOOLBOX Insert the supplied CD-ROM into the CDROM drive of the Sofrware". The installer will start. Follow the instructions of the installer and start the installation. The PLUS TOOLBOX, the TWAIN driver and the USB - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 7
The USB driver is installed on the computer with the installer, but this does not complete association with the USB port. In order to use PLUS TOOLBOX, install using the procedure described below with the copyboard connected. Preparation 1. Press the ON/Standby button of the Copyboard to turn on the - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 8
"Add or Remove Programs or Applications" (this will differ depending on the OS) to display the "Add or Remove Programs Properties" screen. Select PLUS TOOLBOX from among the list displayed and click [Change / Remove] to display the Add or Remove wizard screen. Selecting the [Remove] radio button - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 9
When a computer on which the "PLUS TOOLBOX" dedicated software is installed is connected to the copyboard, the "PLUS TOOLBOX" main menu appears. Main (1) (9) (2) (3) (4) (5) (7) (10) See the Copyboard User's Manual for operating information. (Listed below are the names of the buttons and - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 10
Firmware Update" and "Security" tabs. Click a tab to switch to the corresponding screen. Notice • To set the "Security" settings, contact you nearest PLUS Vision sales office, dealer or store. Hardware Setup: Set the copyboard's operating environment here. See page E-15. Header/Footer: This is used - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 11
Menu Screen Names and Functions ④ ⑤ ⑥ ⑦ ④ (Help) Click this to display the operating instructions. ⑤ (Minimize) Click this to minimize the menu screen, displaying it as an icon on the task bar. ⑥ (Close) Click this to exit the program. ⑦ Device - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 12
task bar, and the main menu appears automatically when the copyboard is connected. • The main menu can also be displayed by right-clicking on the PLUS TOOLBOX icon on the task bar and selecting "Show". Reading the image of the current sheet surface Click the Start Scan button. The transfer will - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 13
bar. The print setting screen of the personal computer will open. ② Clicking the [Print] button will print the selected image. Settings such as paper size and orientation, and quality of color printing can be set on the screen that is displayed by clicking the [Preferences] button. This screen will - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 14
from the personal computer. Notice When other TWAIN compatible applications are used to capture the picture data, while PLUS TOOLBOX software is running, following procedure should be taken. When PLUS TOOLBOX is running or its icon appears on the Windows task bar, and the picture data is attempted - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 15
switches to (only one radio button can be selected within each item). • Print setting This is operational when the Copyboard and printer are connected. Paper Size Select whether to print on A4 or letter size paper. Note Only printer models specified by PLUS can be connected to the Copyboard. E-15 - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 16
on the copyboard's sheet surface. When "Match Paper Size" is selected, the image is compressed in the horizontal direction to the same is changed. Setting the time By factory default, the time is set to Japan Standard Time. PLUS TOOLBOX uses a 24-hour time display. Click to [▲] return, to [▼] advance. 1. When - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 17
amount of image data as compared to the selection of High Resolution. High Resolution: Vertical and horizontal dimensions of the read image will be 1:1 size. This will result in an image that appears better than with the standard selection. File Format Select the format of the images stored on the - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 18
Creation and Editing of Headers/Footers This is the creation and editing of the headers/footers that print or display the company name, logo, or other information at the top and bottom of the printing paper or acquired image. The factory default is the registration of only the date/time stamp in the - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 19
This screen is used to input text and select items such as font type and size of the text. See "Text Editor Tool" below. Clicking the text input [ text is inserted, each one forms a box and is placed in an editing box. The size of this box can be changed, and the front-to-back order can be swapped. - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 20
of Italic Each click toggles the selection between [Italic] and [Standard]. All the text will change inside the text input box. • Change of Size and Swapping of Front-to-Back Order Selection of Objects * The term object indicates an image, text, division line, background, or date and time - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 21
editing box and printing, etc. 8 mm Background color Division line Technology Department No. 4 2008/ 10/3 09:34 Insertion of the Date and Time Text input PLUS Vision Corp. * To make a logo, create an image with the personal computer and save it in any one of the BMP, JPEG, PNG, GIF, WMF - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 22
be placed at the upper left of the editing box. Adjust the position or size. See "Change of Size and Swapping of Front-to-Back Order" on Page E-20 ② Click (Add text is hidden, the text will be brought to the front. See "Change of Size and Swapping of Front-to-Back Order" on Page E-20 XX-0123 XX-0123 - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 23
Creation and Editing of Headers/Footers ⑥ When creating a footer, click the footer editing box and move the dark blue frame. The footer will be created in the same area as the header. Saving on the Personal Computer Click (Save as). Displays the "Save as" screen of the personal computer. Set such - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 24
Creation and Editing of Headers/Footers Updating the Internal Header/Footer Information of the Copyboard Two ways of updating the information are available. One way is to transfer the information to the Copyboard by connecting the Copyboard and personal computer via a USB connection. The other way - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 25
Creation and Editing of Headers/Footers Updating from USB Memory ① Save the header/footer file in the USB memory. Do not save within a folder of the USB memory. When USB memory is inserted in the USB port of the Copyboard, the Copyboard will search for the .hfd file. If the file has been saved - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 26
Update the Copyboard's Internal Program Download the update program from the PLUS Vision website. Preparations: 1. Download the "Copyboard Firmware Update" program ("M-12_XX_XX.zip") from the PLUS Vision website. 2. Unzip the "M-12_XX_XX.zip" file and save the program file ("m12_XX_XX.mot"). For - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 27
be applied to your machine's USB memory, PC connection, and additional printing. Registration is required to obtain the software. For details, please refer to the PLUS Vision website. http://www.plus-vision.com/en/ E-27 - Konica Minolta magicolor plus | magicolor plus Copyboard M-12 Series Tool Box So - Page 28
© 2008, PLUS Vision Corp. 23-4638-08A
Software Operation Manual
We greatly appreciate your purchase of this PLUS Vision product.
In order to take full advantage of the features of the
software supplied
with the M-12 and M-125 Copyboards, please read this software operation manual carefully
before use. After reading, be sure to keep the manual for future reference.
Copyboard M-12 Series