Konica Minolta magicolor plus magicolor plus Copyboard M-12 Series Tool Box So - Page 9

Menu Screen Names and Functions When a computer on which the "PLUS TOOLBOX" dedicated software is installed is connected to the copyboard, the "PLUS TOOLBOX" main menu appears. Main menu ④ ⑤ ⑥ ② ⑦ ① ③ ① Control panel button Use this to operate the Copyboard from the personal computer. Click the control panel button to open a con- trol panel that will offer the same operations as the Copyboard. The control panel will differ depending on the Copyboard that you are using. Model M-12S/M-12W Model M-125 (3) (2) (5) (4) (8) (1) (6) (1) (9) (2) (3) (4) (5) (7) (10) See the Copyboard User's Manual for operating information. (Listed below are the names of the buttons and indicators of the user's manual.) (1) Print button This is operational when the Copyboard and printer are connected. (2) Color button (3) Color mode lamp (4) Density button (5) Density mode lamp (6) Feed/Stop button (7) Page change buttons (8) Stop button (Copyboard does not have one) Clicking this while the sheet is scrolling will stop the scrolling at the starting position of the page. (9) Page indicators (10) Screen button Click to close the control panel. ① Start Scan button Click this to scan the words or diagrams drawn on the copyboard onto the computer. The copyboard's sheet moves, scanning of one sheet's worth of data begins, and the data is transferred to the computer. (Indicates the transfer conditions during the transfer.) The preview screen is displayed when the transfer is finished. See Page E-12. (1) File (F) Click this to save the transferred image (i.e., the image of the (1) preview display) on the personal computer, or to print it with (2) the printer that is connected to the personal computer. The pull-down menu will be displayed. (2) Save button Click this to save the transferred image (i.e., the image of the preview display) on the personal computer. E-9