Kyocera ECOSYS FS-3640MFP Teaching Assistant Operation Guide (Setup) - Page 12
Changing Grade Letter Percentages
View all Kyocera ECOSYS FS-3640MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
(Note: SMTP settings must be configured as described in section 7.2 for this feature to work.) 13. Press 'Save to USB' to save the results to a USB flash drive. (Note: USB drive must be inserted in the copier PRIOR to pressing the Save to USB button. After the files are saved, the drive must be 'cleanly-ejected' by pressing the 'Remove' button on the Job Status/cancel screen Removable Memory tab.) Changing Grade Letter Percentages To temporarily change the percentage threshold for a grade letter, press the Option button prior to grading the test. To make permanent changes, refer to section on Configuring Grading Application. 12
12
(Note: SMTP settings must be configured as described in
section 7.2
for this feature to work.)
13.
Press ‘Save to USB’ to save the results to a USB flash drive.
(Note: USB drive must be inserted in
the copier PRIOR
to pressing the Save to USB button. After the files are saved, the drive must be
‘cleanly
-
ejected’ by pressing the ‘Remove’ button on the
Job Status/cancel
screen
Removable
Memory
tab.)
Changing Grade Letter Percentages
To temporarily change the percentage threshold for a grade letter, press the
Option
button prior to
grading the test. To make permanent changes, refer to section on
Configuring Grading Application
.