Kyocera ECOSYS FS-3920DN Kyocera Command Center Operation Guide Rev 6.5.2012.7 - Page 14
Basic > Defaults > Device Defaults, Override A4/Letter
View all Kyocera ECOSYS FS-3920DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
COMMAND CENTER Pages Basic > Defaults > Device Defaults This page allows you to change the language that is used in the display, as well as to set the Auto Sleep Mode. Operation Panel Language You can select the language of the messages on the display by following the procedure given below. The following languages are available for selection in the drop down list: English, Français, Deutsch, Italiano, Nederlands, Español, Português, Russian, and the downloaded languages. You can optionally download messages in other languages. Contact your dealer for information. Some models may require restarting after configuration. Sleep Timer Specifies the time from 1 to 240 minutes after which the system enters the auto sleep mode. On some models, you can choose sleep mode from Quick Recovery and Energy Saver as follows. 1 Click Advanced on the right hand side of the Sleep Timer drop down list. 2 Select Quick Recovery or Energy Saver. Energy Saver lets the system not to wake up even when it receives print data. Printing does not take place until a user operation is made on the machine operator panel. For some models, the Sleeping page appears while the system is engaged in Energy Saver. To wake up the system, click the Start key on the Sleeping page. 3 Select the interface or device to which Energy Saver is turned On. If set to Off, print data applied through that interface or device wakes the system and is printed normally. 4 Click Submit. Note: Advanced settings are not available when the FAX Kit is installed. Power Off Timer This feature is incorporated with some models. This will automatically engages the device into a power off state in the absence of data after a predetermined time of interval. The interval and conditions can be configured as follows: 1 Select the time of interval after which the device engages in power off state from the drop-down list, 1 hour to 1 week. 2 Click Advanced to open Power Off Rule. 3 Select the interface which you want to activate (On) or deactivate (Off) the power off timer. Override A4/Letter Specifies whether or not the A4 and Letter size paper should be interchangeable. When turned On, for example, if the A4 paper is not in the tray, the Letter size paper will be selected for printing. When turned Off, the Letter size paper will not be used in place of the A4 paper, when A4 is selected for printing but the A4 tray is empty. Auto Error Clear Specifies whether or not to clear errors automatically when they occur. 3-7 User Guide