Kyocera ECOSYS FS-3920DN Kyocera Command Center Operation Guide Rev 6.5.2012.7 - Page 51
Advanced > Management > SNMP > SNMPv1/v2c, Login User Name
View all Kyocera ECOSYS FS-3920DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
COMMAND CENTER Pages E-mail Address Enter the E-mail address. POP3 Server Name Enter the POP3 server name or IP address. If you use the server name, you must first specify the DNS server information. For details, refer to Advanced > Protocols > TCP/IP > General on page 3-35. POP3 Port Number Enter the POP3 port number or use the default port number 110. POP3 Server Timeout Enter the timeout in seconds during which this machine tries to connect to the POP3 server. Login User Name Enter the login name of the user. Login Password Enter the password for connecting to the user name above. Use APOP Enables or disables APOP. To use APOP, make sure that the POP3 server supports APOP. POP3 Security Enables or disables POP3 Security. When this protocol is enabled, either SSL/TLS or STARTTLS must be selected. To enable POP3 security, the POP3 port may have to be changed according to the server settings. Typically, 465 for SSL/TLS and 25 or 587 for STARTTLS are well-known SMTP ports. Test This will test one transmission for each press, attempting to establish communication with the POP3 server. Delete e-mail after retrieval Enables or disables the Delete E-mail after retrieval function. When this item is set to On, the retrieved E-mail is deleted from the POP3 server. When this item is set to Off, the E-mail will not be deleted after retrieved from the POP3 server. E-mail size limit Enter maximum E-mail size in Kilobytes. When the value is 0, the limitation for E-mail size is disabled. Cover Page Specifies whether to print the body of E-mail in addition to the attached files. When this item is set to On, the attached files and the body of E-mail are printed. When no attached files exist, only the body of E-mail is printed. When this item is set to Off, only the attached files are printed. When no attached files exist, nothing is printed. Advanced > Management > SNMP > SNMPv1/v2c The SNMP protocol is used for providing and transferring management information within the network environment. Should an error occur such as Add Paper, the printing system automatically generates a trap, an error message sent to predetermined trap recipients. The community names are used like passwords. COMMAND CENTER 3-44