Kyocera ECOSYS FS-6525MFP FS-6525MFP/6530MFP Operation Guide - Page 320
Troubleshooting > Solving Malfunctions, connecting the printer cable.
View all Kyocera ECOSYS FS-6525MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 320 highlights
Troubleshooting > Solving Malfunctions Symptom Checkpoints Corrective Actions Paper often jams. Is the paper loaded correctly? - Load the paper correctly. Turn the orientation 180 degrees around in which the paper is positioned. Is the paper of the supported type? Is it Remove the paper, turn it over, and in good condition? reload it. Is the paper curled, folded or wrinkled? Replace the paper with new paper. Are there any loose scraps or jammed Remove any jammed paper. paper in the machine? 2 or more sheets are - overlaps when ejected. (multi feed) Load the paper correctly. Reference Page 3-2 1-16 3-3 3-7 3-2 3-2 10-25 3-2 Printouts are wrinkled. - Is the paper damp? Printouts are curled. - Is the paper damp? Cannot print. Is the machine plugged in? Is the machine powered on? Are the printer cable and network cable connected? Was the machine powered on before the printer cable was connected? Is the print job paused? Cannot print with USB memory. USB memory not recognized. Is the USB host blocked? - When displaying an image sent from the machine on the PC, an image size is shrunk vertically or horizontally. Have you selected 200×100dpi Normal or 200×400dpi Super for the scan resolution? Turn the orientation 180 degrees around in which the paper is positioned. Replace the paper with new paper. If you experience frequent problems, turn the cassette heater switch on. Turn the orientation 180 degrees around in which the paper is positioned. Replace the paper with new paper. If you experience frequent problems, turn the cassette heater switch on. Plug the power cord into an AC outlet. Turn on the main power switch. Connect the correct printer cable and network cable securely. Power on the machine after connecting the printer cable. Resume printing. Select [Unblock] in the USB host settings. Check that the USB memory is securely plugged into the machine. Select a scan resolution other than 200×100dpi Normal or 200×400dpi Super when sending an image. 3-2 3-2 2-4 3-2 3-2 2-4 2-11 2-12 2-10 2-10 8-3 9-23 - 3-52 10-10